Further information for Hager GD102N Mini Distribution Box 2PLE IP30
General
Mounting method
Surface mounted (plaster)
Number of rows
1
Width in number of modular spacings
2
Type of cover
Optional
Cover model
With notch
Material housing
Plastic
Height
160 mm
Width
55 mm
Depth
82 mm
Internal depth
82 mm
Colour
White
RAL-number
9010
Degree of protection (IP)
IP30
Type of closure
Other
Type of door
Other
Transparent cover/door
DIN-rail
With mounting plate
Extension possible
EMC-version
With lock
The Hager Miniverteiler GD102N is a compact surface-mounted distributor from the gamma series, designed for use in dry indoor environments. It provides space for two modules and is designed according to DIN 43880, making it suitable for protecting small electrical circuits. The housing is made of robust plastic in pure white colour (RAL 9010) and features a protection rating of IP30, which protects against solid foreign objects larger than 2.5 mm and splashing water from any direction. Dimensions are 160 mm (height) × 55 mm (width) × 82 mm (depth), with an internal depth of 82 mm. Installation is surface-mounted, with fastening via screws. The distributor is not equipped with a DIN rail, mounting plate, or mounting option, and does not include a lock or transparent cover. The cover is available optionally and is described as other closure.
Applications
The GD102N is intended for use in dry indoor environments and is not suitable for outdoor use. It is particularly suitable for limited space conditions where a compact, reliable protection of electrical circuits is required. The rated voltage is 230 V, and the rated current is 32 A. The distributor box is designed for REG devices operating up to 63 A at 230 V AC or 3 × 45 A at 400 V AC. The mechanical impact resistance is classified as IK05, indicating low impact resistance suitable for use in enclosed rooms.
Functions and Equipment in Detail
The distributor features a cable entry, enabling easy installation and maintenance. It is not equipped with a neutral conductor terminal block or earthing terminal block. The number of rows is 1, and the number of modules is 2, with a width in module units of 2. The cover is available optionally, with the version described as with cutout. The colour is pure white (RAL 9010), and the material is plastic. The protection class is II, meaning the distributor does not require a protective earth connection.
Technical Explanation
The IP30 protection rating ensures that no solid foreign objects larger than 2.5 mm and no splashing water can enter the device. This makes the distributor suitable for dry indoor environments, but not for damp or wet conditions. The IK05 rating indicates that the distributor is protected against minor mechanical stresses such as light impacts, which is sufficient for use in normal indoor environments. The glow wire test at 750 °C according to EN 60695-2-11 confirms the thermal resistance of the material.
Compatibility and Accessories
For the GD102N, the accessory S35S cover strip RAL9010 pure white 219 mm breakable is available. This cover strip can be used for optical finishing or to extend the cover. Combining it with the cover strip allows for a clean and uniform visual design of the distributor, especially when multiple modules or additional components are mounted.
Installation and Mounting
Installation is surface-mounted, with fastening via screws. There is no mounting plate or mounting option, so the distributor is directly fixed to the wall or another substrate. Installation is simple and requires no additional tools. The cable entry allows direct connection of electrical cables. Dimensions of 160 mm × 55 mm × 82 mm allow placement in confined spaces without impairing functionality.
Operational Advantages
The GD102N provides reliable protection for small electrical circuits in dry indoor environments. Its compact design and simple installation facilitate easy setup and maintenance. The IP30 protection rating and IK05 rating ensure sufficient protection against mechanical and environmental influences. The use of plastic as material ensures high thermal resistance and long service life. Compliance with RoHS and REACh-SVHC freedom ensures environmentally compatible use. The cover with cutout allows flexible design, especially when additional components or modules are mounted.