Further information for Hager CDA440D RCD 4-pole 40A
General
Number of poles
4
Rated voltage
400 V
Rated current
40 A
Rated fault current
0.03 A
Rated insulation voltage Ui
500 V
Rated impulse withstand voltage Uimp
4 kV
Mounting method
DIN rail
Leakage current type
A
Short-circuit breaking capacity (Icw)
6 kA
Surge current capacity
0.25 kA
Frequency
50 Hz
Degree of protection (IP)
IP20
Width in number of modular spacings
4
Built-in depth
70 mm
Ambient temperature during operating
40 °C
Pollution degree
2
Connectable conductor cross section multi-wired
16 mm²
Connectable conductor cross section solid-core
25 mm²
Power loss
6.50 W
RAL-number (akin)
7005
Voltage type
AC
Selective protection
Short-time delayed tripping
Additional equipment possible
With interlocking device
Explosion-proof
The residual current circuit breaker CDA440D from Hager is a 4-pole switch with a rated voltage of 400 V and a rated current of 40 A. It is designed for use in electrical installations where reliable protection against earth faults and personal and fire protection through interruption of faulty currents is required. The switch features residual current type A, which detects both alternating and pulsating direct fault currents, making it particularly suitable for applications with electronic devices. The rated residual current is 30 mA, ensuring high sensitivity to dangerous fault currents. The short-circuit withstand capability is 6 kA, enhancing safety under high current loads.
Residual current circuit breakers are indispensable in electrical installations to immediately interrupt power supply in case of a fault current. The CDA440D is specifically designed for use in residential and commercial buildings where high safety requirements exist. Installation is done on a DIN rail, enabling standardized and quick installation. The protection class IP20 safeguards against contact with moving parts and prevents entry of solid foreign objects with a diameter greater than 12.5 mm, but does not protect against water or dust. The operating temperature is up to 40 °C, and the switch can still deliver the full rated current of 40 A at temperatures as low as -25 °C.
Technology explained clearly: The switch operates with a screw connection for the input and a biconnect connection for the output, enabling flexible and secure connections. The connection cross-sections are 1 to 25 mm² for single-core conductors and 1 to 16 mm² for multi-core conductors. The mounting depth is 70 mm, and the width corresponds to 4 module units, allowing compact installation in standard switchboards. The power loss is 6.50 W, limiting heat generation during operation. The rated insulation voltage Ui is 500 V, and the impulse voltage withstand Uimp is 4 kV, enhancing reliability during transient voltage surges.
Compatibility and accessories: The switch can be combined with various accessories that extend its functionality. These include contact modules such as CZ001, used for signal transmission when the switch is operated. Cable bridges like K67L and K67M enable easy connections between devices. Phase bar models such as KDN463B and KDN463A provide stable power supply for multiple devices. The locking device MZN175 and the spacing piece LZ060 support safe and orderly installation.
Mounting and installation: Installation is done on a DIN rail, with a nominal torque of 2.80 Nm for the upper and lower terminals. The orientation of the connection terminals is standardized to ensure uniform and secure connections. The maximum operating altitude is 2000 m above sea level, enabling use in various geographical regions. The device lifespan is 2000 electrical and 4000 mechanical switching operations, ensuring high operational reliability over a long period.
Advantages in operation: The switch offers high safety through rapid response to fault currents and interruption of power supply. The use of type A enables detection of pulsating direct fault currents, which can occur in modern electronic devices. Mounting on DIN rail and the use of biconnect connections simplify installation and maintenance. The power loss of 6.50 W ensures low heat generation, extending the device's lifespan. Compatibility with various accessories expands application possibilities and allows flexible adaptation to different requirements.
Residual current type A is particularly important as it also detects pulsating direct fault currents, which can occur in devices with rectifiers or electronic circuits. The short-circuit withstand capability of 6 kA ensures the switch operates safely even under high current loads. The rated voltage of 400 V and the rated current of 40 A make the switch suitable for a wide range of applications. The protection class IP20 provides sufficient protection against contact and foreign objects, but is not suitable for outdoor use or in damp environments. The mounting depth of 70 mm and the width in module units of 4 allow compact installation in standard switchboards. The ambient temperature of 40 °C is the maximum operating temperature at which the switch still functions reliably. The connectability of conductors up to 25 mm² (single-core) and 16 mm² (multi-core) offers flexibility in cabling. The frequency of 50 Hz corresponds to the European standard. The power loss of 6.50 W is low and contributes to heat generation. The rated insulation voltage Ui of 500 V and the impulse voltage withstand Uimp of 4 kV enhance reliability during transient voltage surges. The pollution degree of 2 means the switch is suitable for environments with low pollution, such as residential and commercial buildings. The voltage type is AC, which applies to most electrical installations in Europe. The RAL number (similar) 7005 describes the device's color, which corresponds to a dark gray tone.
Additional features are possible, enabling device expandability. The locking device ensures the switch cannot be accidentally operated. The maximum operating voltage is 440 V, expanding application possibilities. The rated current values remain constant at 40 A across a temperature range of -25 °C to 40 °C, ensuring reliability in various environments. The lifespan of 2000 electrical and 4000 mechanical switching operations demonstrates the high quality and durability of the device. The dimensions are 83 mm (height), 70 mm (width), and 70 mm (depth), enabling a compact design. RoHS compliance is given, ensuring the device's environmental compatibility.
The switch is suitable for use in residential and commercial buildings where high safety requirements exist. Mounting on DIN rail and the use of biconnect connections simplify installation and maintenance. The power loss of 6.50 W ensures low heat generation, extending the device's lifespan. Compatibility with various accessories expands application possibilities and allows flexible adaptation to different requirements. The residual current type A feature is particularly important as it detects pulsating direct fault currents, which can occur in modern electronic devices. The short-circuit withstand capability of 6 kA ensures the switch operates safely even under high current loads. The rated voltage of 400 V and the rated current of 40 A make the switch suitable for a wide range of applications. The protection class IP20 provides sufficient protection against contact and foreign objects, but is not suitable for outdoor use or in damp environments. The mounting depth of 70 mm and the width in module units of 4 allow compact installation in standard switchboards. The ambient temperature of 40 °C is the maximum operating temperature at which the switch still functions reliably. The connectability of conductors up to 25 mm² (single-core) and 16 mm² (multi-core) offers flexibility in cabling. The frequency of 50 Hz corresponds to the European standard. The power loss of 6.50 W is low and contributes to heat generation. The rated insulation voltage Ui of 500 V and the impulse voltage withstand Uimp of 4 kV enhance reliability during transient voltage surges. The pollution degree of 2 means the switch is suitable for environments with low pollution, such as residential and commercial buildings. The voltage type is AC, which applies to most electrical installations in Europe. The RAL number (similar) 7005 describes the device's color, which corresponds to a dark gray tone.
Additional features are possible, enabling device expandability. The locking device ensures the switch cannot be accidentally operated. The maximum operating voltage is 440 V, expanding application possibilities. The rated current values remain constant at 40 A across a temperature range of -25 °C to 40 °C, ensuring reliability in various environments. The lifespan of 2000 electrical and 4000 mechanical switching operations demonstrates the high quality and durability of the device. The dimensions are 83 mm (height), 70 mm (width), and 70 mm (depth), enabling a compact design. RoHS compliance is given, ensuring the device's environmental compatibility.