The GVS C load switching actuator 8-way with manual operation can also be used as a heating actuator. 8 independently controllable loads can be switched. The integrated manual operation enables switching even without KNX operation and when the actuators are not programmed. The REG actuators can be mounted multi-phase on a DIN rail. The ETS (from version 3.0d) is required for project planning and commissioning.
Functions:

• Manual operation
• Time functions, switch-on/switch-off delay
• Staircase light function with advance warning and adjustable lighting duration
• Calling up scenes/presets: 1-bit/8-bit
• Logical links: AND, OR, XOR, gate function
• Status feedback
• Forced operation and safety function
• Reaction to threshold values
• Control of electrothermal valve actuators
• Definition of switching positions in the event of bus voltage failure and recovery
Technical data:

• Power supply: 21~30 V via the bus
• Operating load: 12mA
• Power consumption: max. 360 mW
• Outputs: 8
• Switching voltage: 230V AC 50/60 Hz, 400V AC 50/60 Hz
Dimensions:

• 8 HP - 143 mm x 90mm x 60mm
• Mounting: 35mm DIN rail/top hat rail
3-year manufacturer's guarantee