Calibration set with calibrator and multimeter. The METRAHIT CAL calibrator serves as a precise calibration and simulation device for electrical quantities. With the METRAHIT AM XTRA multimeter you can check your calibrated quantities immediately. Universal calibration source for mV, V and mA signals. Simulation of thermoelectric voltages on various thermocouple types for specified temperatures (F) as well as resistance values for various Pt and Ni temperature sensors. Frequency and pulse group generator for testing PLCs, energy metering devices, flow, etc. The amplitude of the generated rectangular pulses can be adjusted and used to simulate sensor pulses. Measuring transducers with a wide range of input signals (voltage, thermoelectric voltage, RTD and 2-wire resistance transmitters, etc.) can be connected directly and calibrated. By using a multimeter (e.g. METRAHIT AM XTRA), the corresponding measured values can be measured at the transducer output, transferred to a PC via an adapter if necessary, displayed there using the optional METRAwin90-2 software and compared with the respective calibration specifications. The target and actual values are displayed or printed out as a certificate. In the 'mA-Sink' position, the METRAHIT CAL simulates a two-wire transmitter and draws the selected current value from the measuring chain. 1 METRAHIT CAL calibrator with 2 IEC LR6 batteries including accessories:1 pair of safety measuring leads (yellow and black) (1.5 m) with 4 mm test probes, 1000 V CAT III, 600 V CAT IV1 short operating instructions1 CD-ROM, contents: operating instructions in German and English1 rubber protective cover1 DAkkS calibration certificate1 METRAHIT AM XTRA multimeter including accessories:1 pair of safety measuring leads (1.5 m) with 4 mm test probes, 1000 V CAT III, 600 V CAT IV (KS17-2)2 x batteries 1.5 V, type AA1 x short operating instructions in German/English1 x CD-ROM, contents: operating instructions in German and English1 x DAkkS calibration certificate1 x rubber protective cover1 hard case HC30