Further information for Goobay 93667 Cat6 S/FTP Patch Cable White
Technical data
Connection, type
RJ45 connector (8P8C)
Connection 2, type
RJ45 connector (8P8C)
Bend protection
Ambidextrous
Pin retention protection
Ambidextrous
Connection, contact material
Gold-plated 3μm
Cable type
Tubular cable
Type 1, shielding
Film (Alu) PiMF
Type 2, shielding
Braided (Alu) overall shield
Conductor, material
CU (Copper)
Cable jacket, material
LSZH
Colour version
White
Colour
White
Special feature
Length indication on connector
Connection, shielding
LSZH-compliant
The Goobay Patch cable Cat6A is a double-shielded network cable for connecting IT components such as PCs, laptops, routers, switches, Smart-TVs, game consoles and NAS systems. It is suitable for home networks, home office environments as well as professional network applications. The cable is designed as a round cable and features two RJ45 connectors (8P8C) at both ends, which are shielded. The contact surfaces are gold-plated with 3 μm, preventing corrosion and ensuring a stable, interference-free signal transmission. The inner conductors are made of pure copper (CU), ensuring high conductivity and signal integrity.
Applications
The cable is designed for use in networks with high requirements for bandwidth and signal quality. It supports 10-Gigabit Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s) and is therefore suitable for modern networks requiring high data rates and low latency. The cable construction with S/FTP overall shielding – consisting of an aluminium foil shielding (PiMF) for individual wire pairs and an aluminium braid shielding for the entire cable jacket – provides effective protection against electromagnetic interference. This is particularly important in environments with high electromagnetic noise, such as offices or industrial facilities.
Functions and equipment in detail
The connectors are fitted with strain relief boots at both ends to reduce mechanical stress during bending or installation and to protect the cable from breakage. Additionally, the RJ45 connectors feature a latch protection, preventing the latch from catching or breaking and thus ensuring a reliable mechanical connection. The cable length is printed directly on the connectors, which is helpful during installation and maintenance.
Technology explained simply
The shielding class S/FTP (PiMF) means that each wire pair is individually shielded with aluminium foil (PiMF = Pair in Foil) and additionally the entire cable jacket is surrounded by an aluminium braid. This double shielding minimizes the impact of external interference and simultaneously prevents electromagnetic fields from radiating out of the cable. The maximum bandwidth is 500 MHz, enabling use for current and future network standards. The cable is specified according to ISO/IEC 11801 Cat 6A Class Ea Channel Link and has been tested accordingly, with a test report included.
Compatibility and accessories
The cable is suitable for Power over Ethernet (PoE and PoE+), meaning it transmits power and data over the same network cable. This is particularly useful for devices such as IP cameras, access points or VoIP phones, which are powered via the network. The wiring follows EIA/TIA-568B, which represents a standard wiring configuration for Ethernet networks. The cable jacket is made of halogen-free material (LSZH), producing lower smoke and toxicity values in case of fire, thus ensuring higher safety.
Installation and mounting
The cable has a diameter of 5.9 ± 0.2 mm and a minimum bending radius of 59 mm, which should be considered during installation to avoid mechanical damage. The operating temperature ranges from -20 °C to +65 °C, allowing use in indoor and outdoor environments, provided the ambient conditions remain within these limits. The stable jacket and strain relief construction facilitate installation, especially in tight or demanding routing situations.
Advantages in operation
The combination of double shielding, gold-plated contacts and pure copper conductors ensures high signal quality and reliability. The PoE capability enables flexible installation without additional power supply. The length marking on the connectors and the robust construction simplify maintenance and identification within the network. The cable is designed for use in networks with high requirements for bandwidth and interference protection, offering a long-term stable connection.