eNet radio switching or touch actuator 1-way REG Features: Can be set with eNet server: Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0. Operating locks. Update of device software. The eNet radio switching or touch actuator receives telegrams for switching lights from the eNet radio receiver module or eNet server via a data line. Operating modes: Switch actuator or touch actuator. Status feedback to eNet radio transmitter. Scene operation. Button operating mode: Relay contact remains closed as long as telegrams are received (max. 60 seconds). Can be set with eNet server: Flashing function. Follow-up time. Switch-on or switch-off delay. Switch-off warning. Minimum switching repeat time. Permanently on, permanently off. Notes: An eNet radio receiver module or an eNet server is required to operate this DIN rail mounted device.