General
Other bus systems	eNet
Model	Dimming actuator
Mounting method	DRA (DIN-rail adapter)
Width in number of modular spacings	8
Number of outputs	4
Output power	250 W
Type of load	Universal
Voltage	230 V
Frequency	60 Hz
Degree of protection (IP)	IP20
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Bus connection included
Substation input
Local operation/hand operation
With LED indication
Power boost suitable
Parallel-service possible

eNet wireless dimmer actuator 4-way 4 x 250 W VA REG Features: Can be set with eNet server: Fully encrypted wireless transmission (AES-CCM) from eNet server software version 2.0. Operating locks. Update of the device software. The eNet wireless dimmer actuator receives telegrams for switching and dimming various electrical loads from the eNet wireless receiver module or eNet server via a data line. Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps. Lamp-friendly switching on. Switch-on and minimum brightness can be saved for each output. Scene operation. Status display of the outputs with LED. Status feedback to eNet wireless sensors. Parallel connection of several outputs up to a load of 950 W possible. Short circuit and overtemperature protection. Automatic or manual setting of the dimming method. Can be set with the eNet server: Maximum brightness. Dimming method. Dimming speed. Follow-up time. On or off delay. Dimming ramp up or down. Switch-off warning. Permanently on, permanently off. Hotel function. Light control. Notes: An eNet radio receiver module or an eNet server is required to operate this DIN rail-mounted device.