General
Other bus systems	eNet
Model	Dimming actuator
Mounting method	Flush mounted (plaster)
Number of outputs	1
Output power	250 W
Type of load	Universal
Voltage	230 V
Degree of protection (IP)	IP20
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Bus connection included
Substation input
Local operation/hand operation
With LED indication
Power boost suitable
Parallel-service possible

eNet wireless dimmer actuator 1-way mini 20 - 250 W VA Features: Can be set with eNet server: Fully encrypted wireless transmission (AES-CCM) from eNet server software version 2.0. Operating locks. Update of the device software. The eNet wireless dimmer actuator enables the switching and dimming of various electrical loads. Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps. Lamp-friendly switching on. Switch-on and minimum brightness can be saved for each output. Scene operation. Status display with LED. Status feedback to eNet wireless sensors. Short-circuit and overtemperature protection. Automatic or manual setting of the dimming process. Can be set with eNet server: Maximum brightness. Dimming process. Dimming speed. Run-on time. Switch-on or switch-off delay. Dimming ramp up or down. Switch-off warning. Permanently on, permanently off. Hotel function. Light control. Repeater function. Localization of the device. Notes: Installation in device box, surface-mounted housing or in the installation adapter.