General
Assembly arrangement	Basic element
Type of load	Universal
Mounting method	Flush mounted (plaster)
Material	Other
Material quality	Other
Surface protection	Other
Colour	Other
Nominal voltage	230 V
Frequency	60 Hz
Rated current	16 A
Type of fastening	Mounting with claw and screw
Min. depth of built-in installation box	32 mm
Number of channels	1
Substation input
Light value memory
Applicable with button
Applicable with movement sensor
Applicable with presence indicator
Applicable with time switch/timer
Applicable with transmission button
Applicable with infrared button
Transparent
IFTTT support available

System 3000 relay switching insert, potential-free - Switching of lighting and single-phase motors. - Control of electric underfloor heating and thermal actuators in combination with a room temperature controller attachment. - Switching of different voltage potentials or external conductors via the potential-free contact. - Connection of extensions possible. - Automatic switching off of the load. Follow-up times can be set in five stages, cannot be retriggered. - Test operation for functional testing. - Operation with neutral conductor connection. Combination with RF operating attachment 1-way / 2-way for KNX: - Switching actuator channel 1-way. - Sensor channel 1-way or 2-way. - Local control of the System 3000 insert possible. - Radio control of other devices for KNX as a sensor possible. - {b}Function selection of the insert:{\b} Normally open/normally open operation, staircase function with switch-off warning, scene function (16 scenes), lock function, time delays. Extension input can be used as an additional control point for the System 3000 application or for radio control of other KNX devices as a sensor. - The combination of attachments 5393xx and 5394xx is only possible from I05 (index). If the ambient temperature is higher than 35 °C, the connected load must be reduced.