KNX push button sensor 3 comfort 1-way system 55, with commissioning rockerFeatures: Installation on bus coupler 3. Dismantling protection through screwing. Two multi-colored status LEDs per control surface. Integrated temperature sensor for measuring and transmitting the local room temperature. Rocker or button function can be set for each control surface. Rocker function: switching, dimming, blind control, 1-byte value transmitter, 2-byte value transmitter, scene extension and room temperature controller extension. Button function: switching, dimming, blind control, 1-byte value transmitter, 2-byte value transmitter, scene extension and room temperature controller extension. Controller extension: operating mode switching with normal and high priority, defined selection of an operating mode, switching between different operating modes, changing the presence state, setpoint shift. Locking object for locking individual button or rocker functions. Display of an alarm message by flashing all LEDs. Multi-colored status LED (red, green, blue) can be configured globally or separately. A superimposed function can be activated via the bus, whereby the color and display information of individual status LEDs can be changed based on priority. Communication object for brightness control of the status LED and for labeling field lighting (e.g. for reducing the brightness in bedrooms at night). Labeling field lighting for rocker sets with labeling field. Labeling field lighting can be switched ON, OFF, automatically switched off or via object. Notes: Professional labeling via the Gira labeling service www.beschriftung.gira.de. The push button sensor is supplied with a program-neutral commissioning rocker. The rocker set to match the switch range must be ordered separately.