General
Model	Brand-dependent
Type of power supply	230 V AC
Connection	Three-four-wire
Thermal feedback	None
Control characteristic	PID
Number of heater outputs	1
Number of cooler outputs	1
Sensor/feeler type	Resistance sensor
Mounting method	Flush mounted (plaster)
Max. contact voltage	230 V
Degree of protection (IP)	IP20
Colour	Other
Standby power consumption (solstandby)	0.5 W
Contact type	Change-over contact (NO/NC)
Measuring range	30 °C
With receiver
Heating
Temperature readable
With sound indicator
With display
With tap water circuit
Explosion-proof
IFTTT support available
Suitable for cooling
Suitable for heating

Use of room temperature controller 230 V~ with break or make contact, off switch and control light - Control of electrothermal actuators for 230 V~. - Control of the room temperature in closed rooms. - Manually switching off the temperature control. - Input terminal for activating the setback temperature (ECO) via central clock. - Input terminal for activating cooling mode via central control. - Internal temperature sensor. - Frost protection function. - Silent switching. - Temperature drop detection (calling up the frost protection temperature when the window is opened). - Output signal: pulse width modulation (PWM) or two-point control (on/off). - Adaptation to valves (open when de-energized or closed when de-energized). - Offset setting (correction value for the measured temperature). - Setting range of the room temperature can be restricted using setting rings. - Valve protection function (opening and closing the valve once a week).