General
Assembly arrangement	Basic element
Method of operation	Other
Type of load	Universal and LED Retrofit
Mounting method	Flush mounted (plaster)
Type of fastening	Other
Material	Other
Material quality	Other
Surface protection	Other
Colour	Other
Nominal voltage	230 V
Frequency	60 Hz
Connection type	Screwed terminal
App control via Bluetooth
Dimming phase cut-off
Serial dimmer
Substation input
Light value memory
Applicable with button
Applicable with movement sensor
Applicable with presence indicator
Applicable with time switch/timer
Applicable with transmission button
Applicable with infrared button
Halogen free
Transparent
IFTTT support available

System 3000 Universal LED Dimmer MiniFeatures: Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps. Operation via extensions. Automatic or manual setting of the dimming principle suitable for the load (leading edge or trailing edge). Display of the set operating mode via LED. Lamp-friendly switching on. Switch-on brightness can be saved permanently. Switch on with last set brightness or saved switch-on brightness. Minimum brightness adjustable. Electronic short-circuit protection. Electronic overtemperature protection. Operation with and without neutral conductor connection.Notes: In principle, the dimmer can be operated without connecting the neutral conductor, but some LED and CFLi lamps require a neutral conductor connection to avoid flickering. When operating without a neutral conductor, the minimum load for incandescent lamps, HV halogen, Tronic transformers and wound transformers increases to 50 W. Electronic transformers and ballasts for LED lamps can be operated using the dimming method specified by the manufacturer. The switch-on brightness cannot be saved using a button. The installation adapter mini housing 5429 00 is used for installation in false ceilings. If the ambient temperature is higher than 25 C, the connected load must be reduced.