Flush-mounted radio RDS System 55 pure white matt FM radio with RDS display for flush installation. The flush-mounted radio RDS consists of a radio unit with control tower and a loudspeaker insert with cover. The radio insert is housed in a compact, flush-mounted insert and can be installed in a single flush devices can. The included speaker can be installed with the radio use in a combination or sold in the wallbox. On the radio insert two speakers can be connected. The radio automatically detects connected loudspeakers and switches between stereo and mono mode to. The display shows the control tower at an appropriate RDS signals the station name, station frequency and the time. The operation of the radio is about the capacitive buttons on the control tower. To operate a light touch of the symbols is only necessary. The RDS flush-mounted radio runs two Speicherplaetze, on each of which a station can be stored and retrieved easily by Tastenbetaetigung. About the auxiliary input can be switched on the radio as a light switch or an automatic switch together with the room lighting. About the stereo AUX input of the radio external audio sources can be fed into the radio as MP3 players. For connection of external audio source is additionally the RCA socket 4 3 .. required, which is connected to the AUX terminals of radio use. In sleep mode, the radio will automatically 3 minutes after it is turned on. Note: In combination with other electronic devices under a common cover may occur Empfangsbeeintraechtigungen. Power supply: 23 V AC connection: screw terminals 2.5 mm (power connector)
, 5 mm (Lautsprecher-/AUX-Anschluss) Temperature range: -5 ° C to +5 C IP 2 Frequency range: 87.5 to
8 MHz Type: 228 27 Quantity:
ST.