Motion detector Cube 240 for KNX pure white glossy Features: The PIR motion detector consists of three passive infrared (PIR) sensors with integrated brightness sensor, integrated IR receiver and integrated red light-emitting diode (LED) to indicate detected movement in test mode. Two independent light outputs. Light output: switching, dimming value transmitter or light scene extension can be parameterized. Fully automatic operating mode (automatic on or off) or semi-automatic (manual on, automatic off). Follow-up time can be set or dynamic follow-up time can be activated. Day-night switching. Locking object. Automatic temperature-compensated sensor sensitivity. Sensor sensitivity can be parameterized. Send brightness values cyclically or when they change. Presence output independent of brightness. A switch-on delay and a follow-up time can be parameterized. It is possible to send the current status cyclically depending on the state. Absence output independent of brightness. A switch-on delay and a follow-up time can be parameterized. In this case, the follow-up time expires as soon as someone has entered the detection area. It is possible to send the current status cyclically depending on the condition. Manual operation via IR remote control. Notes: Suitable for ceiling and wall mounting indoors and outdoors. Optional: Can be remotely controlled via IR remote control KNX.