General
Other bus systems	None
Model	Movement sensor
Mounting method	Flush mounted (plaster)
Material	Plastic
Material quality	Thermoplastic
Surface protection	Lacquered
Colour	Stainless steel
Optimum mounting height	1.1 m
Max. transmission range sideways	6 m
Max. transmission range frontally	10 m
Detection angle vertical	180 °
Bus system KNX
Bus system KNX radio
Bus system radio frequent
Bus system LON
Bus system Powernet
Radio frequent bidirectional
Transparent
Bus connection included
Substation input
Creep-under protection
Operation mode switch
Animal zone
Staircase monitoring
Response value luminosity adjustable
Teach-function for response value luminosity
Switch-off delay self-learning

Motion detector attachment 1.10 m comfort for KNX stainless steel (painted) System 55 - Adjustment of the sensitivity using an adjuster on the device or with IR remote control PIR KNX (accessory). - Evaluation of the measured brightness using up to three independent brightness limit values. - Display of motion detection (permanent or only in the walking test). - Up to 5 function blocks that can be configured as required for the application 'guardian', 'guardian with switch-off brightness' or 'detector'. - Two output communication objects are available for each function block, via which the switching and control commands are sent to the KNX bus. - Configurable functions: switching, staircase function, dimming value transmitter, scene extension, temperature value transmitter, brightness value transmitter, operating mode switching, switching with forced position. - Function block switching for bus-controlled switching between two function block groups. - Switching the operating mode (OFF / AUTO / ON) of the first function block during operation by local operation. - Demand-oriented blocking of individual function blocks via the KNX. - Manual operation of the controlled KNX actuators and consequently deactivation of the PIR automatic possible. - In brightness-independent operation, the function block can determine the time period after a last movement and send it to the KNX bus via a communication object. This function allows, for example, simple monitoring of people's movements in assisted living or in a retirement home. - Function of the motion detection can be adjusted for the 'guardian' or 'guardian with switch-off brightness' application. - The device can be used in the 'guardian' or 'guardian with switch-off brightness' applications as a single device, as a main unit or as an extension. - Walk test function to help with project planning and setting the PIR detection range. - Integrated room temperature measurement. - Dismantling alarm, when the device is removed from the bus coupler, a 1-bit or 1-byte telegram is triggered. - IR remote control PIR KNX (accessory) for setting functions of the first function block (twilight level, sensitivity of motion detection, motion evaluation and follow-up time). Switching the walk test function on and off.