KNX push button sensor 3 comfort 2-wayPure white glossyFeatures: Installation on bus coupler 3. Dismantling protection through screwing. Two multi-colored status LEDs per control surface. Integrated temperature sensor for measuring and transmitting the local room temperature. Rocker or button function can be set for each control surface. Rocker function: switching, dimming, blind control, 1-byte value transmitter, 2-byte value transmitter and scene extension. Button function: switching, dimming, blind control, 1-byte value transmitter, 2-byte value transmitter, scene extension and room temperature controller extension. Controller extension: operating mode switching with normal and high priority, defined selection of an operating mode, switching between different operating modes, changing the presence state, setpoint shift. Locking object for locking individual button or rocker functions. Display of an alarm message by flashing all LEDs. Multi-colored status LED (red, green, blue) can be configured globally or separately. A superimposed function can be activated via the bus, whereby the color and display information of individual status LEDs can be changed based on priority. White operating LED. Operating LED ON, OFF, automatic switch-off or can be switched via object. Communication object for controlling the brightness of the status LED and operating LED (e.g. for reducing the brightness in bedrooms at night). Notes: Professional labeling via the Gira labeling service www.beschriftung.gira.de.