KNX / EIB Analogue 4x KNX / EIB system DRA plus product family: Output Product type: Analog output 4 x 4 x Analogue REG with integrated bus coupling converts KNX / EIB telegrams (1-byte and 2-byte) into analog output signals. These analog output signals allow actuators for heating, air-conditioning and Ventilation, adjust their Ausgangsgroessen due to bus information and to participate in control processes. The four outputs can be configured by software to voltage or current signals. Current signals: 0 to 20 mA, load <= 500 4 to 20 mA, load <= 500 voltage signals: 0 to 1 V, load> = 1 k is 0 to 1 V, load> = 1, k 0 to 10 V, load> = 1 k Spannungsausgaenge be supervised for short circuit. The initial state is indicated by the status LED. The Ausgangsgroessen can be positively driven. Unused outputs can be switched off. Mounting on DIN rail. The analog needs the power 1024 00 to care. Number of Outputs: 4 Supply Voltage: AC 24 V connections: KNX / EIB about connection and branch terminal 0595 00 connections: outputs, supply with screw connections: 0.5 to 4 mm Solid Connections: 0,34 to 4 mm stranded without ferrule connections : 0.14 to 2.5 mm flexible with ferrules) Protection: IP 20 Dimensions: DRA device with 4 modules

Type: 102200
Quantity: 1 unit.