Gira 030900, EAN: 4010337309000

Gira 030900 Potentiometer 1-10 V Switching Function

Installation > Switch Material > Switch Electronics

Gira 030900 Potentiometer 1-10 V Switching Function

Lieske Part No. 746027
Mfg Part No 030900
EAN-Code 4010337309000
Manufacturer Gira
Here only 55,60 EUR
66,16 EUR incl. VAT

Further information for Gira 030900 Potentiometer 1-10 V Switching Function

General
Mounting methodFlush mounted (plaster)
Control current50 mA
Rated current6 A
Nominal voltage230 V
Frequency60 Hz
Method of operationTurn button
ColourOther
Dimming 1-10 Vyes
Substation inputyes
Light value memoryno
Applicable with buttonyes
Applicable with movement sensorno
Applicable with presence indicatorno
Applicable with time switch/timerno
Applicable with transmission buttonno
Applicable with infrared buttonno
IFTTT support availableno
Transparentno
The Gira 030900 is an electronic potentiometer for flush mounting, specifically designed for controlling electronic ballasts (EVG) or Tronic transformers via a 1–10 V control input. The device features an integrated switching function, where pressing the control knob opens or closes the circuit, while rotating the knob adjusts the brightness continuously. Control is performed via a rotary knob, which serves both for switching and dimming. The base brightness is adjustable, allowing individual adaptation to different lighting scenarios.

Applications
This potentiometer is intended for use in electrical installations where dimmable lighting is controlled via 1–10 V interfaces. It is particularly suitable for applications with electronic ballasts, such as those used in modern luminaires, especially with fluorescent tubes or LED modules. The device is for indoor use only, as the ambient temperature must be between +5 °C and +25 °C. The mounting depth is 32 mm, enabling installation in standard flush-mounted boxes.

Functions and Equipment in Detail
The switching function is activated by pressing the rotary knob — this turns the connected lighting on or off. Rotating the knob controls brightness via the 1–10 V interface. The control voltage ranges from 0.7 V to 12 V, with a maximum control current of 50 mA. The switching capacity for resistive loads is specified as 6 A, sufficient for controlling luminaires with corresponding power. An integrated short-circuit protection via a fuse protects the switching contact from overloads. The fuse is included in the delivery scope.

Technology Explained Simply
The device operates as an electronic potentiometer, modulating the voltage at a 1–10 V input to control the brightness of the connected lighting. The 1–10 V interface is a common standard interface in lighting technology, enabling continuous dimming. The nominal voltage is 230 V AC at a frequency of 50/60 Hz. Control is performed via a rotary knob, which handles both the switching and dimming functions. The base brightness is adjustable, allowing adaptation to different room conditions.

Compatibility and Accessories
The potentiometer is designed for use with electronic ballasts and Tronic transformers that feature a 1–10 V control input. It is not intended for use with motion sensors, presence detectors, time switches, function keys, or IR keys. Suitable covers for System 55 are available, including in the colours alu, pure white, anthracite, pure white matte, and cream white. For System 70, sealing knobs in pure white and black matte (lacquered) are available, providing a watertight sealing option.

Mounting and Installation
Installation is performed flush. The mounting depth is 32 mm, enabling use in standard flush-mounted boxes. The ambient temperature must be between +5 °C and +25 °C. Installation requires connection to a 230 V AC power supply and to the 1–10 V control input of the electronic ballast. The integrated fuse is included in the delivery scope and must be considered during replacement installations.

Operational Advantages
The device enables precise and continuous dimming via the 1–10 V interface, allowing flexible light control in rooms with electronic ballasts. The integrated switching function allows turning the lighting on and off by pressing the rotary knob. The adjustable base brightness offers additional customization options. The integrated short-circuit protection via the fuse increases operational safety. Use with compatible covers enables visual harmonization with other switching and control elements in System 55 or 70.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/746027
qrcode für Gira 030900 Potentiometer 1-10 V Switching Function