Gira 021104, EAN: 4010337211044

Gira 021104 Frame 1f pure white matte standard

Installation > Switch Material > Switch Flush standard

Gira 021104 Frame 1f pure white matte standard

Lieske Part No. 446677
Mfg Part No 021104
EAN-Code 4010337211044
Manufacturer Gira
Here only 3,18 EUR
3,78 EUR incl. VAT

Further information for Gira 021104 Frame 1f pure white matte standard

General
Number of units1
Mounting directionHorizontal and vertical
Number of units horizontal1
Number of units vertical1
MaterialPlastic
Material qualityThermoplastic
Surface protectionOther
ColourWhite
RAL-number (akin)9010
Degree of protection (IP)IP20
Type of fasteningClamp mounting
With mounting gridno
Suitable for floor boxno
Suitable for wall ductyes
Suitable for built-in installationno
Label space/information surfaceno
Halogen freeyes
Transparentno
With hinged lidno
Antibacterial treatmentno
Flush-mounted installationyes
The Gira Standard 55 cover frame, type 021104, is a single frame for flush installations in the electrical installation system. It is made of halogen-free, impact- and break-resistant thermoplastic, ensuring high mechanical stability and safety under mechanical stress. The surface is finished in pure white with a satin-matte texture, giving the product a discreet, professional appearance and enabling seamless integration into standardized installation systems. The colour corresponds approximately to RAL number 9010. The frame is designed for flush mounting and can be installed both horizontally and vertically. It does not include a mounting frame and is installed using a clamp fastening system. The protection rating is IP20, meaning it protects against contact with fingers and against solid foreign objects up to 2.5 mm, but not against water or dust. It is not suitable for mounting in underfloor duct boxes, but is designed for installation in device installation channels, making it suitable for structured cabling systems in buildings.

Applications

The cover frame is primarily designed for use in flush installations, particularly in residential and commercial buildings, where a clean and uniform surface mounting of switches, sockets or other electrical components is required. It is especially suitable for installations where components are laid in channel systems, as it is specifically designed for mounting in device installation channels. Use in open channels allows for flexible and modular installation without requiring additional mounting aids.

Functions and Equipment in Detail

The frame is designed as a single cover frame, meaning it is intended for mounting a single electrical component such as a switch, push-button or socket. It does not feature an integrated labelling surface or text fields, allowing it to blend discreetly into the wall. The surface is not transparent and does not include a hinged cover. Installation is achieved via a clamp system, enabling quick and secure mounting without additional tools. The use of halogen-free thermoplastic reduces smoke development in the event of fire and improves fire safety.

Technology Explained Simply

The use of thermoplastic as the material provides sufficient strength and dimensional stability to withstand mechanical stresses during daily operation. The halogen-free composition reduces the formation of toxic gases at high temperatures, which is particularly advantageous in enclosed spaces. The IP20 protection rating safeguards against direct contact with moving parts and against ingress of solid foreign objects, but not against water or dust. This makes the frame suitable for indoor environments where no special environmental conditions such as humidity or splashing water are present.

Compatibility and Accessories

The cover frame can be used in combination with an IP44 sealing kit for water-protected flush mounting, enabling its use in damp areas such as bathrooms or kitchens, provided the appropriate sealing kit is used. Compatible sealing kits are available, including the IP44 sealing kit for switches/push-buttons Standard 55, E2 (article number 325400) and the IP44 sealing kit System 55 for socket KD (article number 025227). These accessories enable a higher protection rating and extend the frame’s range of applications.

Installation and Mounting

Installation is performed using a clamp fastening system, allowing the frame to be directly clamped into distribution channels or pre-drilled holes in the wall. The option for horizontal and vertical mounting provides flexibility in installation planning. Since the frame is not suitable for underfloor duct boxes, installation must take place in appropriate channel systems. Use in device installation channels is specifically intended, facilitating integration into existing cabling systems.

Operational Advantages

The cover frame provides a robust and secure mounting base for electrical components. The use of halogen-free material increases safety in the event of fire. The clamp fastening system enables quick and tool-free installation, reducing mounting time. Compatibility with sealing kits extends the range of applications to damp environments without requiring modifications to the frame itself. The uniform colour and surface texture ensure harmonious integration into standardized installation systems.

Protection Rating and Environmental Conditions

The IP20 protection rating is designed for dry indoor environments. For damp or wet areas, such as bathrooms or kitchens, use in combination with an IP44 sealing kit is required to achieve the necessary protection class. The use of sealing kits enables water-protected mounting, allowing the frame to be used in rooms with increased humidity.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/446677
qrcode für Gira 021104 Frame 1f pure white matte standard