Gira 016300, EAN: 4010337163008

Gira 016300 Key Switch Changeover Insert

Installation > Switch Material > Switch Flush standard

Gira 016300 Key Switch Changeover Insert

Lieske Part No. 104988
Mfg Part No 016300
EAN-Code 4010337163008
Manufacturer Gira
Here only 59,91 EUR
71,29 EUR incl. VAT

Further information for Gira 016300 Key Switch Changeover Insert

General
Assembly arrangementBasic element
ModelSingle push button
Method of operationKey
Number of rockers0
Mounting methodFlush mounted (plaster)
Type of fasteningMounting with claw and screw
MaterialOther
Material qualityOther
Surface protectionOther
ColourOther
ImprintNone
Suitable for degree of protection (IP)IP20
Connection typePlug clamp
Feedback-signal contactno
With lightingno
Halogen freeno
Antibacterial treatmentno
Transparentno
Label space/information surfaceno
With signal lampno
IFTTT support availableno
With light sourceno
The Gira key switch 016300 is a flush-mounted insert for installation in electrical switching systems. It serves as a 1-pole switch (also usable as a group switch) with a rated voltage of 250 V~ and a rated current of 10 A. The insert is specifically designed for use with DIN profile half-cylinders and enables mechanical operation via a key. Installation is exclusively in flush-mounted housings using screw fastening; installation in surface-mounted housings is not intended. The installation depth is 40 mm.

Applications

The key switch is primarily intended for controlling electrical loads in buildings, especially in areas where controlled, key-only operation is required. It can be used as a secondary station in conjunction with a blind control system with secondary station input, enabling central control of blinds from multiple locations. The application is for indoor use, as the insert is designed for protection class IP20, which provides protection against contact with fingers and against solid foreign objects up to 12.5 mm in diameter, but does not offer resistance against water or dust.

Functions and Equipment in Detail

The switch features a push-in terminal as the connection type, enabling secure and quick connection of wires. It is a basic element without a feedback contact, without illumination, without a signal lamp, and without an integrated light source. The colour is specified as other, indicating a standard version without special colouring. There are no text fields, labelling surfaces, or prints. The fastening is achieved via claw and screw fastening, but according to the manufacturer's instructions, only screw fastening is permitted.

Technology Explained Simply

The insert is designed for an electrical load of up to 10 amperes at 250 volts AC, which is sufficient for controlling lamps, motors, or other electrical devices in residential and commercial buildings. The 1-pole circuit means that the switch controls only one circuit, making it suitable for simple switching functions. The use with DIN profile half-cylinders enables mechanical operation that is only possible with a matching key, providing additional security. The installation depth of 40 mm must be considered during planning of the flush-mounted installation to ensure correct mounting.

Compatibility and Accessories

The key switch is compatible with all DIN profile half-cylinders. As accessories, suitable profiles such as the 541400 S3000 blind control insert with secondary control input are available, enabling integrated blind control. The key cover System 55 Pure White (item 066403) can be used as an optical cover for the housing to complement the design of the installation.

Installation and Mounting

Installation is exclusively in flush-mounted housings using screw fastening. The installation depth of 40 mm must be considered when planning the wall opening. Wiring is done via push-in terminals, ensuring a secure and reliable connection. Installation requires compliance with VDE standards and adherence to electrical safety regulations. Use in surface-mounted housings is not intended and not recommended.

Operational Advantages

The insert offers secure, key-only operation, making it suitable for applications where uncontrolled operation must be prevented. Its use as a secondary station in blind control systems enables flexible and central control. The push-in terminals simplify installation and maintenance. Compatibility with DIN profile half-cylinders ensures universal usability in existing locking systems. Compliance with protection class IP20 ensures operational safety in indoor environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/104988
qrcode für Gira 016300 Key Switch Changeover Insert