Fränkische Rohrwerke 23170032, EAN: 4013960180398

Fränkische Rohrwerke 23170032 clipfix-H0 32 plastic clamp grey

Installation > Pipes > PVC - Conduit Accessories

Fränkische Rohrwerke 23170032 clipfix-H0 32 plastic clamp grey

Lieske Part No. 629981
Mfg Part No 23170032
EAN-Code 4013960180398
Manufacturer Fränkische Rohrwerke
Here only 123,02 EUR
146,39 EUR incl. VAT

Further information for Fränkische Rohrwerke 23170032 clipfix-H0 32 plastic clamp grey

General
MaterialPPE
ColourGrey
Colour codeRAL 7035
Degree of protectionnon-flame propagating
Halogen-free100 % halogen-free
NormDIN VDE V 0604-2-100
CompatibilityPlastic conduit FPKu-EM-F-LS0H Low Smoke, FPKu-EM-F-H0, corrugated conduits
MountingC-profile rail 10 mm
Mounting methodstackable and modular
Nominal width32 mm
The clipfix-H0 32 is a plastic clamp from manufacturer Fränkische Rohrwerke, specifically designed for securing plastic installation pipes. It is made of PPE (polyphenylene ether) and is finished in grey (RAL 7035). The clamp is non-flame propagating and 100 % halogen-free according to DIN VDE V 0604-2-100, making it suitable for use in installations with increased safety requirements. The low smoke development during fires improves visibility in escape and rescue routes, as no dense smoke clouds are formed. Additionally, no toxic or corrosive gases are produced, as the clamp is halogen-free.

Applications

The clipfix-H0 32 is used for securing plastic straight pipes of types FPKu-EM-F-LS0H Low Smoke and FPKu-EM-F-H0, as well as all corrugated pipes. It is particularly suitable for installations in buildings where smoke development and the formation of toxic gases during a fire must be minimized, for example in hospitals, administrative buildings, or public facilities. The clamp is designed for mounting on C-profile rails with a width of 10 mm, enabling flexible and modular fastening.

Functions and Equipment in Detail

The clamp is stackable and alignable, allowing for continuous fastening along the rail. Installation is achieved via an integrated clip mechanism, ensuring secure and quick mounting. For nominal sizes 40, 50, and 63 mm, additional clipsib securing brackets are included, providing extra stabilization for pipe connections. These securing brackets are not intended for nominal size 32 mm, as the clamp is supplied without additional brackets for this size.

Technology Explained Simply

The use of PPE as the material ensures high thermal resistance and mechanical strength. The clamp is non-flame propagating, meaning it does not burn independently when exposed to open flame, but only as long as the flame directly affects it. Halogen-free composition reduces the risk of toxic and corrosive gases forming during a fire, increasing safety in fire situations. Low smoke development improves visibility in escape and rescue routes, which is critical for evacuating people.

Compatibility and Accessories

The clipfix-H0 32 is specifically designed for use with plastic straight pipes FPKu-EM-F-LS0H Low Smoke and FPKu-EM-F-H0, as well as all corrugated pipes. Mounting is done on C-profile rails with a width of 10 mm. Under extreme operating conditions such as strong vibration, high temperatures, overhead mounting, or high weights, it is necessary to reduce the specified spacing between clamps or to use metal securing brackets (ASG-E). The clamp is not intended for use in environments with aggressive chemicals or strong mechanical loads without additional measures.

Installation and Mounting

Installation is performed by simply sliding the clamp onto the C-profile rail and then inserting the pipe into the clamp. The stackable and alignable design allows for continuous fastening along the rail. The clamp is designed for quick and secure installation without tools. During installation planning, the prescribed spacing between clamps must be observed, which may vary depending on load and environmental conditions.

Operational Advantages

The halogen-free and non-flame propagating properties of the clipfix-H0 32 increase safety in fire situations. Low smoke development improves visibility and facilitates evacuation. The use of PPE ensures high mechanical and thermal stability. The stackable and alignable design enables flexible and modular installation. The clamp is suitable for use in installations with high safety requirements, particularly in buildings where fire prevention and evacuation safety are of special importance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/629981
qrcode für Fränkische Rohrwerke 23170032 clipfix-H0 32 plastic clamp grey