Further information for Frankische 22370050 clipfix 50 Clamp Grey
Delivery form
Width
62 mm
Height
56 mm
Minimum quantity
25
Pallet content
4000
Base unit quantity
Piece
Technical data
Material
Plastic
Material quality
Polyethylene (PE)
Surface protection
Other
Max. number of tubes
1
Mounting type
Screw hole
Colour
Grey
Closed
Suitable for protective hoses
Tackable
With inlay
With wall seal
UV resistant
The clipfix 50 is a plastic clamp from manufacturer Fränkische Rohrwerke, specifically designed for securing plastic conduit pipes in electrical installations. The product is made of polypropylene and is available in grey (RAL 7035). It is non-flame propagating and is used for secure anchoring of pipes such as isofix-EL-F, FPKu-EM-F, FPKu-ES-F, as well as all corrugated pipes. The clamp is designed for a nominal size of 50 mm and allows the fixation of a single pipe.
Applications
The clipfix 50 is used in electrical installations, particularly for securing installation conduits in indoor and outdoor environments. It is suitable for installations in screed, prefabricated construction, concrete, wood, soil, under plaster, on plaster, and outdoors. The clamp is also intended for applications in the machine construction industry and for hot asphalt installations. Standard installation spacing is 90 cm; however, when using clipsib securing brackets, spacing can be reduced to 60 cm. The specified spacing applies for temperatures up to 40 °C; for temperatures up to 50 °C, spacing must be reduced accordingly.
Functions and Equipment in Detail
The clamp can be mounted and arranged in series on a C-profile rail with a width of 10 mm, enabling modular and flexible installation on profiles. Fixation is achieved via screw holes, ensuring secure attachment to the substrate. For nominal sizes 40, 50, and 63, clipsib securing brackets are included, enhancing stability under increased loads. The clamp is not UV-resistant, meaning it may experience material degradation under prolonged direct sunlight exposure.
Technology Explained Simply
The clipfix 50 is made of polypropylene, a robust plastic known for its high mechanical strength and chemical resistance. The clamp is non-flame propagating, meaning it does not contribute to fire spread in case of fire. The standard grey colour (RAL 7035) is commonly used for installation accessories in electrical engineering. The clamp is designed for a maximum of one pipe and can be mounted on C-profile rails. Dimensions are 62 mm in width and 56 mm in height.
Compatibility and Accessories
The clamp is compatible with plastic conduit pipes isofix-EL-F, FPKu-EM-F, FPKu-ES-F, as well as all corrugated pipes. As an accessory, the M50 Quick-Clamp PP light grey RAL7035 is available, also suitable for securing installation conduits. The use of clipsib securing brackets for nominal sizes 40, 50, and 63 is recommended to enhance fixation security.
Installation and Mounting
Mounting is done by securing to a C-profile rail (10 mm) using screws. The clamp can be arranged in series or stacked, enabling flexible and modular installation. Under extreme conditions such as vibration, high temperatures, overhead installations, or heavy loads, the specified clamp spacing must be significantly reduced or replaced with metal securing brackets (ASG-E) to ensure installation safety.
Operational Advantages
The clipfix 50 provides secure and stable fixation of installation conduits. Modular mounting on C-profile rails enables flexible and efficient installation. The use of clipsib securing brackets for nominal sizes 40, 50, and 63 increases fixation security. The clamp is non-flame propagating, improving fire safety of the installation. Installation spacing is adjusted according to application conditions to ensure secure and stable fixation.