Fränkische Rohrwerke 22370020, EAN: 4013960180169

Frankish 22370020 clipfix 20 clamp gray

Installation > Pipes > PVC - Conduit Accessories

Frankish 22370020 clipfix 20 clamp gray

Lieske Part No. 825118
Mfg Part No 22370020
EAN-Code 4013960180169
Manufacturer Fränkische Rohrwerke
Here only 72,20 EUR
85,92 EUR incl. VAT

Further information for Frankish 22370020 clipfix 20 clamp gray

General
MaterialPolypropylene
ColourGrey
Colour codeRAL 7035
Flame spreadnon-flame propagating
Compatibilityisofix-EL-F, FPKu-EM-F, FPKu-ES-F, conduit pipes
Mounting methodstackable and modular
Mounting railC-profile rail 10 mm
Accessoriesclipsib fuse holder (for nominal sizes 40, 50, 63)
Delivery form
Width30 mm
Height29 mm
Minimum quantity100
Pallet content16000
Base unit quantityPiece
Technical data
MaterialPlastic
Material qualityPolyethylene (PE)
Surface protectionOther
Max. number of tubes1
Mounting typeScrew hole
ColourGrey
ClosedNo
Suitable for protective hosesJa
TackableJa
With inlayNo
With wall sealNo
UV resistantNo
The clipfix 20 from Fränkische Rohrwerke is a plastic clamp made of polypropylene, manufactured in grey (RAL 7035). It is used for securing plastic conduit pipes, particularly the types isofix-EL-F, FPKu-EM-F, FPKu-ES-F, and all corrugated pipes. The clamp is non-flame-propagating and thus suitable for use in electrical installations where limited fire hazard is required. The clamp is specifically designed for mounting on a C-profile rail with a width of 10 mm, and can be mounted either side-by-side or stacked. This enables flexible and quick installation in electrical distributions and installation systems.

Applications
The clipfix 20 is primarily used in the field of electrical installation, where plastic pipes are used for routing electrical cables. It is particularly suitable for securing conduit pipes in indoor environments, for example in residential and commercial buildings, where clean and fast mounting is required. The clamp is available for nominal sizes 40, 50, and 63, and for these sizes, clipsib securing brackets are included in the delivery scope. These securing brackets support the stability of the fastening, especially for longer pipe sections.

Functions and Equipment in Detail
The clamp is made of polypropylene, a robust and durable plastic that is resistant to mechanical stress and environmental influences such as moisture or temperature fluctuations. The grey colour (RAL 7035) ensures visual harmony with other installation components. The clamp is non-flame-propagating, meaning it does not contribute to the spread of fire and self-extinguishes when ignited. This meets the requirements for components in electrical installations that must exhibit limited fire hazard.

Technology Explained Simply
The clipfix 20 is a clamp that, through its special design, enables secure and durable fastening of the pipe to the C-profile rail. The clamp is simply slipped over the pipe and fastened to the rail. Installation is tool-free, which speeds up the process. Clamp spacing is typically standardized, but must be reduced under special conditions such as vibration, high temperatures, overhead mounting, or high weight loads. In such cases, it is recommended to replace the plastic clamps with metal securing clamps (ASG-E) to ensure mechanical stability.

Compatibility and Accessories
The clipfix 20 is compatible with plastic conduit pipes isofix-EL-F, FPKu-EM-F, FPKu-ES-F, and all corrugated pipes. As accessories, clipsib securing brackets are included in the delivery scope for nominal sizes 40, 50, and 63. Additionally, suitable mounting clamps such as the BFM-BS M20 grey 6 mm or the 2955 M20 Quick-Clamp PP light grey RAL7035 can be used to supplement or reinforce the installation.

Mounting and Installation
The installation of the clipfix 20 is done by simply sliding the clamp over the pipe and then fastening it to the C-profile rail. The clamp can be mounted either side-by-side or stacked, allowing for flexible arrangement. The C-profile rail must have a width of 10 mm. Under extreme conditions, such as vibrations or high temperatures, reducing the clamp spacing or using metal securing clamps (ASG-E) is necessary to ensure mechanical strength.

Advantages in Operation
The clipfix 20 offers fast and tool-free installation, reducing installation time. The use of polypropylene ensures high mechanical stability and resistance to environmental influences. The non-flame-propagating property increases safety in electrical installations. Compatibility with various pipe types and the ability to mount clamps side-by-side or stacked increases flexibility in planning and executing installations. The integrated securing brackets for nominal sizes 40, 50, and 63 support the stability of the fastening, especially for longer pipe sections.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/825118
qrcode für Frankish 22370020 clipfix 20 clamp gray