Further information for Finder 151082300010 Electronic Dimmer Master
General
Product type
Master Dimmer
Degree of protection
IP 20
Supply voltage
110 - 230 V AC
Frequency
50/60 Hz
Output signal
0–10 V/1–10 V
Max. current load (0–10 V)
+35 mA
Max. current load (1–10 V)
-35 mA
Output contact
1 make contact (NO)
Max. load current
6 A
Voltage at output contact
230 V AC
Max. starting current
30 A
Stand-by power consumption
0.5 W
Dimming speed
1.5 - 10 s
Memory function
Adjustable
Dimming method
phase cut, phase cut
Number of slave dimmers
up to 32
Number of connectable pilot lights
15
Ambient temperature
-10 - +50 °C
DIN rail
35 mm
Terminal technology
cage clamps
Stairwell lighting function
Memory for energy-saving lamps
The Finder Electronic Dimmer Type 15.10.8.230.0010 is a Master-Dimmer for installation in modular devices, specifically designed for mounting on a DIN rail with 35 mm width according to EN 60715. It serves as the central control unit in a Master-Slave system, enabling simultaneous control of multiple dimmers (Type 15.11) or direct control of a 0–10 V load. The device is designed for use in living rooms, hallways, kitchens, bedrooms, as well as in facilities such as hotels, offices, and hospitals, where flexible and energy-efficient lighting control is required.
Applications
The dimmer is designed to control up to 32 Slave-Dimmers (Type 15.11), enabling central, decentralized, or combined lighting control in larger rooms or buildings. It can also directly control a 0–10 V load, for example an electronic ballast (EB). The application is for indoor use only, as the protection rating IP 20 does not offer protection against water or dust. The ambient temperature must be between –10 °C and +50 °C.
Functions and Features in Detail
The dimmer offers several adjustable functions: it can be operated with or without Memory function, where the last brightness level is stored. A special Memory function for energy-saving lamps ensures safe and disturbance-free operation of these lamps. The stairwell lighting function with pre-warning via dimming down complies with DIN 18015-2 and ensures gentle light shutdown to avoid startling users. The dimming speed is adjustable and can be varied between 1.5 and 10 seconds. The dimming characteristic can be selected as linear dimming or stepwise dimming.
Technology Explained Simply
The dimmer operates with a 0–10 V/1–10 V output signal, which can be used to control Slave dimmers or connected directly to a 0–10 V load (e.g. EB). With a 0–10 V signal, the maximum current load is +35 mA; with a 1–10 V signal, it is –35 mA. The output contact is a make contact rated 6 A/230 V AC, intended for switching the load (e.g. EB). The maximum inrush current is 30 A at 230 V AC; if exceeded, an additional relay or contactor is required. The supply voltage is in the range of 110 to 230 V AC (50/60 Hz), with the operating range at 0.8 to 1.1 times the nominal voltage. The standby power consumption is 0.5 W.
Compatibility and Accessories
The dimmer is designed for use with Slave dimmers Type 15.11, which are controlled via the 0–10 V/1–10 V signal. The Slave dimmers support various load types, including dimmable energy-saving lamps, LED lamps, incandescent lamps, halogen lamps, and conventional transformers. Suitable accessories include connection bridges (e.g. 022.18), spacers (022.09), DIN rail (100 cm), waterproof connectors (e.g. S21-COMP-00751 to S21-COMP-00755), and device holders for 48,3 cm ( 19 inch ) racks (T150 mm/3HE, front mounting). These components enable flexible installation and wiring.
Mounting and Installation
The dimmer is mounted on a DIN rail with 35 mm width. Mounting is done using cage clamps, which allow for secure and quick connections. Installation requires an electrical connection to the supply voltage (110–230 V AC) as well as wiring for load control. The number of connectable light switches is limited to a maximum of 15, with each switch having a current consumption of ≤ 1 mA.
Operational Advantages
The dimmer offers automatic frequency adaptation (50/60 Hz) and ensures lamp-friendly switching on and off. The adjustable dimming speed and the choice between linear and stepwise dimming allow application-specific customization. The stairwell lighting function with pre-warning increases safety in public and residential areas. Compatibility with various lamp types and transformers expands the range of applications. The thermal overload protection function and the integrated thermal fuse protect the device against short circuits and overloads.