Further information for Faber Kabel NYM-O4x10RE-T sheathed cable 4x10,0 mm²
General
Nominal voltage
300/500 V
Operation temperature
+70 °C
Installation temperature range
+5 to +70 °C
Temperature range after installation
-40 to +70 °C
Bending radius
4 x cable diameter
Conductor material
Copper
Conductor cross section
4x10,0 mm²
Insulating material
PVC
Outer sheath
PVC grey
Circuit board construction
Solid up to 10 mm²
Filler compound
The Faber Kabel NYM-O 4x10.0 is a PVC-insulated sheathed cable designed for various installations in households, industry, and outdoor applications. It is suitable for installations in dry and wet rooms, on, in, and under plaster, in masonry, and in concrete — except for vibrated, compacted, or rammed concrete. For outdoor applications, the cable must be protected from direct sunlight to ensure its service life and functionality.
Applications
This cable is used in various areas of electrical installation, including residential buildings, commercial and industrial facilities, as well as outdoor environments. It is suitable for fixed installations in building elements such as walls, ceilings, and floor constructions. Use in concrete is possible, provided the specified restrictions (no vibrated, compacted, or rammed concrete) are observed. The cable is not intended for movable or mechanically heavily stressed applications.
Functions and Equipment in Detail
The NYM-O 4x10.0 consists of four bare copper conductors, each up to 10 mm² in single-strand configuration. The conductors are insulated with PVC, specified according to VDE 0810 Part 4. Identification follows VDE 0810-308, enabling clear identification of the conductors. Between the conductors, a filler sheath ensures uniform shape and mechanical stability. The outer sheath is made of grey PVC and protects the internal components from external influences.
Technology Explained Simply
The rated voltage is 300/500 V, indicating the maximum voltage at which the cable can be safely operated. The maximum operating temperature is +70 °C, and during installation, the cable must withstand temperatures from +5 °C to +70 °C. After installation, it can be exposed to temperatures from -40 °C to +70 °C. The bending radius is 4 times the cable diameter for fixed installation, ensuring safe and crack-free bending. The cable conforms to VDE standards, indicating high quality and reliability.
Compatibility and Accessories
The cable is suitable for use with standard installation components such as cable ducts, distribution boxes, and switchboards. It can be combined with other NYM cables, provided the respective technical specifications match. Use in electrical systems requires compliance with applicable VDE regulations and relevant installation standards.
Installation and Mounting
Installation is carried out by fixed routing in building elements. The cable is suitable for installation in plaster, masonry, and concrete, taking into account mechanical stress and environmental conditions. During installation, care must be taken to ensure the bending radius is not exceeded to avoid cracks in the insulation material. The cable is not intended for movable applications or installations in areas with high mechanical stress.
Advantages in Operation
The NYM-O 4x10.0 offers high mechanical stability and resistance to environmental influences. The PVC insulation and outer sheath protect the conductors from moisture, mechanical damage, and chemical effects. The cable is suitable for use in dry and wet rooms as well as outdoors, provided direct sunlight is avoided. Clear identification according to VDE 0810-308 simplifies installation and maintenance.