Faber Kabel NA2XS2Y1x120RM/16-20

Faber Kabel NA2XS2Y1x120RM/16-20 medium voltage earth cable 1x120 12/20kV

Cables > Underground cables > Medium Voltage Underground Cables N2XSY

Faber Kabel NA2XS2Y1x120RM/16-20 medium voltage earth cable 1x120 12/20kV

Lieske Part No. 889183
Mfg Part No NA2XS2Y1x120RM/16-20
EAN-Code
Manufacturer Faber Kabel
Here only 28,19 EUR
33,55 EUR incl. VAT

Further information for Faber Kabel NA2XS2Y1x120RM/16-20 medium voltage earth cable 1x120 12/20kV

General
Nominal voltage12/20 kV
Test voltage30 kV AC/5 min
Operation temperature90 °C
Installation dates-20 to +70 °C
Operating temperature range-30 to +70 °C
Bending radius15 x cable diameter
Conductor materialAluminium
Conductor shaperound, stranded
Wire insulationcross-linked polyethylene (VPE)
Outer sheathPE black
Screencopper wires, cross-wound helix, foil
Conductor cross section120 mm²
The medium-voltage cable NA2XS2Y 1X 120.0 RM/16 12/20KV from Faber Kabel is an aluminium conductor cable with cross-linked polyethylene (XLPE) as core insulation and a black PE outer sheath. It is designed for use in direct burial, outdoors (under protection against sunlight), indoors, and in cable ducts, and is particularly used in power plant, industrial, and distribution networks. Due to the durable PE sheath, the cable is also suitable for mechanically stressed conditions, although when installed indoors and in cable ducts, note that the sheath is not flame-retardant according to VDE 0472 Part 804, Test Method B.

Applications
This cable is designed for use in medium-voltage networks and is suitable for supplying industrial facilities, power plants, and distribution networks. It can be installed in direct burial, in cable ducts, and outdoors, with outdoor installations requiring protection against direct sunlight to ensure the service life of the PE sheath. Installation indoors is possible, but the lack of flame retardancy of the PE sheath according to VDE 0472 Part 804, Test Method B, must be considered.

Functions and Equipment in Detail
The conductor consists of a bare aluminium conductor according to VDE 0295, Type RM (round, stranded), designed for high mechanical strength and good electrical conductivity. Core insulation is provided by cross-linked polyethylene (XLPE), which offers high electrical strength and resistance to ageing. Between the insulation and shield, an extruded outer conductive layer and a conductive tape are integrated to ensure effective electrical shielding. The shield consists of copper wires and a copper cross-strap, supplemented by a foil that supports electrical shielding. The outer sheath is made of black PE, which withstands mechanical stress during installation and operation.

Technology Explained Simply
The rated voltage of the cable is 12/20 kV, meaning it is designed for electricity transmission in medium-voltage networks. The test voltage is 30 kV AC for 5 minutes, confirming the electrical strength of the insulating material under test conditions. The operating temperature must not exceed +90 °C, while installation can occur at temperatures from -20 °C to +70 °C. After installation, the temperature range of -30 °C to +70 °C is permissible. The bending radius is 15 times the cable diameter, allowing flexible installation without compromising the cable’s mechanical integrity.

Compatibility and Accessories
The cable is designed for use in existing medium-voltage networks and can be combined with standard connectors, termination boxes, and other components for medium-voltage cables.

Installation and Mounting
Installation is carried out in direct burial, in cable ducts, or outdoors. When installed outdoors, the cable must be protected from direct sunlight to slow down the ageing of the PE sheath. The cable’s mechanical strength allows installation under increased pressure or bending, provided the bending radius of 15 times the diameter is maintained. Installation indoors requires consideration of the non-flame-retardant nature of the PE sheath according to VDE 0472 Part 804, Test Method B.

Operational Advantages
The cable features high mechanical strength, making it suitable for demanding installation conditions. The use of XLPE as insulating material ensures high electrical strength and long-term stability. The integrated shielding with copper wires and cross-strap provides effective electromagnetic shielding. The operating temperature of up to +90 °C allows high load capacity, while the temperature range during installation and operation enables flexible use in various environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/889183
qrcode für Faber Kabel NA2XS2Y1x120RM/16-20 medium voltage earth cable 1x120 12/20kV