Application:

For laying underground, outdoors (however, the cable must
be protected from sunlight), indoors and in cable ducts for power stations, industrial and distribution
networks. When laying in cable ducts and indoors, it must
be taken into account that the PE sheath is not flame-retardant according to VDE 0472 T. 804, test type B.
The cable is
suitable for unfavourable operating conditions, in particular if
the penetration of water in the longitudinal direction
is to be avoided after mechanical damage.
Structure:
Conductor: bare copper conductor in accordance with VDE 0295,
(RM) round, multi-wire
(> 50 mm² are compacted)
extruded inner conductive layer
Core insulation: VPE (cross-linked polyethylene)
extruded outer conductive layer
Gap sealing (conductive tape
and expansion tape)
Shield: copper wires and cross-conductive spiral
made of copper
Filling mixture
Outer sheath: black PE
Technical data:
Nominal voltage: 6 /10 kV, 12/20 kV and 18/30 kV
Test voltage: 15 kV AC/5 min. at Uo/U=6/10 kV
30 kV AC/5 min. at Uo/U=12/20 kV
45 kV AC/5 min. at Uo/U=18/30 kV
Temperature range: -20 °C - +70 °C (during installation)
-30 °C - +70 °C (after installation)
Operating temperature: +90 °C (max.)
Bending radius: 15 x cable diameter.