| General |
| Cable type | NA2XS(F)2Y |
| Conductor cross section | 800 mm² |
| Nominal voltage | 35 kV |
| Operating voltage | 12/20 kV |
| Degree of protection | SW |
| Installation method | in ground, water, outdoors, indoors, in cable channels |
| Application area | EVU networks, industrial and distribution networks |
| PE sheath | non-flame retardant |
This product is a medium-voltage earth cable of the brand Faber Kabel, type NA2XS(F)2Y 1X800/35 12/20 KV SW, specifically designed for use in power networks. It is intended for power transmission in utility networks, industrial plants, and distribution networks, and is designed for installation in various environments, including earth, water, outdoors, indoor spaces, and cable ducts. The cable's construction takes into account the requirements for longitudinal water tightness, making it suitable for applications where water ingress must be prevented after mechanical damage.
Applications
This cable is designed for use in underground installations, particularly in water and outdoor environments. It is also suitable for indoor spaces and cable ducts, with the non-fire-retardant nature of the PE sheath according to DIN VDE 0482-332-1 to be considered when installed indoors or in cable ducts. Its use is primarily in power networks, industrial plants, and distribution networks, where high mechanical and weather-related load resistance is required.
Functions and Equipment in Detail
The cable features a construction that prevents water ingress in the longitudinal direction after mechanical damage. This is particularly important for installations in damp or wet environments, such as in earth or water conduits. The designation NA2XS(F)2Y describes the specific construction: it is a cable with a metallic protective layer (aluminium) and a PE sheath that is not fire-retardant. The designation 1X800/35 refers to the conductor cross-section (800 mm²) and the rated voltage (35 kV), with the cable voltage being 12/20 kV. The marking SW indicates special water tightness.
Technology Explained Simply
The designation NA2XS(F)2Y stands for a cable with an aluminium protective layer and a PE sheath that is not fire-retardant. The designation 1X800/35 describes a single conductor with a cross-section of 800 mm² and a rated voltage of 35 kV. The actual operating voltage is 12/20 kV, meaning the cable is designed for a rated voltage of 12 kV and a maximum voltage of 20 kV. The marking SW (water tight) indicates that the cable has been specifically developed for applications where water ingress in the longitudinal direction must be prevented. This is achieved through a special construction of the protective layer, which ensures water tightness even after mechanical damage.
Compatibility and Accessories
The cable is suitable for installation in earth and water conduits, outdoors, indoors, and in cable ducts. It is intended for use in utility networks, industrial plants, and distribution networks. When installed indoors or in cable ducts, the non-fire-retardant nature of the PE sheath according to DIN VDE 0482-332-1 must be taken into account.
Installation and Mounting
Installation is carried out depending on the application environment in earth, water, outdoors, indoor spaces, or cable ducts. Installation in indoor spaces requires consideration of the non-fire-retardant nature of the PE sheath. The cable cut length allows for flexible adaptation to the specific requirements of the installation.
Operational Advantages
The cable offers high mechanical and weather-related load resistance. The longitudinal water tightness ensures that water ingress is prevented even after mechanical damage, increasing the cable's reliability and service life. The construction is designed for adverse operating conditions, making it particularly suitable for critical applications in power networks and industrial plants. Its use in earth and water conduits as well as outdoors is supported by the special protective layer, which ensures functionality even under mechanical stress.