| General |
| Cable type | N2XSEY |
| Number of conductors | 3 |
| Conductor cross section | 95 mm² |
| Protective conductor cross-section | 16 mm² |
| Nominal voltage | 6/10 kV |
| Installation method | Cut length |
| Installation areas | Earth, water, outdoor, indoor, cable channels |
| Application areas | power plant, industrial, and distribution networks |
| Norm | VDE 0276 |
The product is a medium-voltage earth cable with type designation N2XSEY 3X95/16 06/10 KV RT, manufactured by Faber Kabel. It is a power cable designed for use in medium-voltage networks with a rated voltage of 6/10 kV. The cable is intended for installation in earth, in water, outdoors, indoors, and in cable ducts, and is particularly used in power plant, industrial, and distribution networks. Due to its good installation properties, it is also easy to lay even in difficult route conditions. According to standard VDE 0276, the cables must be protected from direct sunlight to ensure long-term functionality and material integrity.
Applications
The cable is designed for use in various environments, including underground installation, underwater installation, outdoors, indoors, and in cable ducts. It is therefore suitable for a wide range of applications in power supply, particularly in power plants, industrial facilities, and distribution networks. Installation is carried out in cut lengths, enabling flexible adaptation to the specific route.
Functions and Equipment in Detail
The cable features a construction with three conductors, each having a cross-section of 95 mm². Additionally, a protective conductor with a cross-section of 16 mm² is integrated. The designation N2XSEY describes the material and construction characteristics: N stands for low voltage, 2 for two layers, X for cross-linked, S for protective conductor, E for earth cable, and Y for the outer protective sheath made of polyethylene. This construction ensures high mechanical and electrical stability as well as good insulation performance.
Technology Explained Simply
The designation 6/10 kV refers to the rated voltage of the cable, where 6 kV is the phase-to-earth voltage and 10 kV is the phase-to-phase voltage. The cable is thus designed for operation in medium-voltage networks. The designation RT (pipe and tunnel installation) indicates that the cable is suitable for installation in pipes and tunnels. The outer protective sheath made of polyethylene provides high protection against mechanical damage, moisture, and environmental influences. Installation is carried out in cut lengths, enabling customized adaptation to the specific installation.
Compatibility and Accessories
The cable is designed for use in existing and new medium-voltage networks. It is compatible with standard connection techniques and components commonly used in electrical and energy technology. Installation is carried out in cut lengths, allowing flexible adaptation to the specific route.
Installation and Mounting
Mounting is carried out in cut lengths, enabling the cable to be adapted to the specific route. Installation is possible in earth, water, outdoors, indoors, and in cable ducts. When installing outdoors, protection from direct sunlight is required according to VDE 0276 to ensure material integrity and functionality of the cable. Installation in pipes and tunnels is also possible, highlighting the versatility of the cable.
Operational Advantages
The cable offers high mechanical and electrical stability due to its construction and materials. The good installation properties enable simple and efficient installation, even in difficult route conditions. Installation in cut lengths provides flexibility and adaptability to different requirements. The outer protective sheath made of polyethylene ensures high protection against environmental influences, increasing the cable's service life and reliability. Compatibility with standard connection techniques facilitates integration into existing networks.