| General |
| Cable type | N2XSEY |
| Number of conductors | 3 |
| Conductor cross section | 50 mm² |
| Protective conductor cross-section | 16 mm² |
| Voltage class | 6/10 kV |
| Installation method | Cut length |
| Application range | Direct burial, water, outdoor, indoor, cable channels |
| Application | power plant, industrial, and distribution networks |
| Norm | VDE 0276 |
| Protective measure | Protection against direct sunlight |
The product is a medium-voltage earth cable with type designation N2XSEY 3X50/16 06/10 KV RT, manufactured by Faber Kabel. It is a high-current cable designed for installation in earth trenches, underwater, outdoors, indoors, and in cable ducts. The application is particularly suited for power plant, industrial, and distribution networks, where reliable and durable power transmission at medium voltage is required. The cable is available as a cut length, allowing flexible adaptation to specific project requirements.
Applications
This cable is designed for use in various environments, including earth installation, underwater installation, outdoor use, and indoors as well as in cable ducts. It is particularly suitable for facilities in the energy supply sector, such as power plants, industrial production sites, and distribution networks. Installation takes place in trenches under various conditions, and the cable’s good installation properties enable easy handling even in complex trench routes.
Functions and Equipment in Detail
The cable features a construction designed for medium-voltage applications. The designation N2XSEY describes the specific design: it is a cable with insulation made of cross-linked polyethylene (XLPE), equipped with a metallic protective layer (in this case, steel tape). The designation 3X50/16 indicates that the cable contains three conductors each with a cross-section of 50 mm² and an additional conductor with a cross-section of 16 mm². This fourth conductor serves as a protective earth conductor (PE) or as an additional conductor for special applications. The voltage class 6/10 kV defines the electrical load capacity of the cable, where 6 kV is the rated voltage and 10 kV is the test voltage.
Technology Explained Simply
The insulation made of cross-linked polyethylene (XLPE) provides high electrical strength and thermal resistance, which is crucial for reliability at high voltages and over long operating periods. The metallic protective layer (steel tape) provides mechanical protection against external influences such as pressure or mechanical damage during installation. The designation RT (pipe and tunnel installation) indicates that the cable is suitable for installation in pipes or tunnels. The installation properties are designed to allow the cable to be laid without special difficulties, even in complex trench routes.
Compatibility and Accessories
The cable is designed for use in existing and new distribution networks that comply with medium-voltage cable standards. It is compatible with standard connection techniques and components commonly used for medium-voltage cables. Installation is carried out in accordance with the regulations of VDE 0276, particularly regarding protection against direct sunlight. This regulation requires that the cable be protected from direct sunlight to avoid thermal overload and material aging.
Installation and Mounting
Installation is typically performed by professional electricians who comply with the regulations of VDE 0276 and the specific requirements of the respective installation. Laying in earth trenches, pipes, or tunnels requires adherence to minimum bending radii and avoidance of mechanical damage. Outdoor or indoor installation requires appropriate protection against direct sunlight, such as the use of protective conduits or shading.
The cable is designed for use in power plant, industrial, and distribution networks, with installation possible in earth trenches, underwater, outdoors, indoors, and in cable ducts. Its good installation properties allow easy handling even in complex trench routes. VDE 0276 requires that the cable be protected from direct sunlight to prevent material aging and thermal stress. The voltage class 6/10 kV defines the electrical load capacity, where 6 kV is the rated voltage and 10 kV is the test voltage. The insulation made of cross-linked polyethylene (XLPE) provides high electrical strength and thermal resistance. The metallic protective layer (steel tape) provides mechanical protection. The designation RT refers to suitability for pipe and tunnel installation. The cable is supplied in cut lengths, enabling flexible adaptation to projects.
Operational Advantages
The cable offers high operational reliability due to its robust construction and high-quality insulation. Its installation properties facilitate easy installation, especially in complex trench routes. Suitability for various environments—from earth trenches to indoor spaces—increases flexibility in planning and implementing power supply networks. Compliance with VDE 0276 ensures conformity with applicable standards and enhances long-term reliability in operation.