| General |
| Cable type | N2XSY |
| Conductor cross section | 240 mm² |
| Protective conductor cross-section | 25 mm² |
| Voltage class | 6/10 kV |
| Installation method | Direct burial, water, outdoor, indoor, cable channels |
| Application area | power plant, industrial, and distribution networks |
| Model | RT |
| Installation properties | good |
| Protective measure | protect from direct sunlight |
| Norm | VDE 0276 |
The product is a medium-voltage underground cable with type designation N2XSY 1X240/25 06/10 KV RT, manufactured by Faber Kabel. It is a power cable designed for installation in underground ducts, underwater, outdoors, indoors, and in cable ducts. The application is particularly suited for power plant, industrial, and distribution networks, where reliable and durable power transmission at medium voltage is required. The cable is available in cut lengths, enabling flexible adaptation to individual route lengths. Due to its good installation properties, it is also easy to lay even in complex or difficult route configurations. According to VDE 0276, the cables must be protected from direct sunlight to avoid unwanted aging of the insulation and impairment of electrical properties.
Applications
This cable is designed for use in various environments, including underground installation, underwater installation, outdoor use, indoor spaces, and cable ducts. It is particularly suitable for applications in energy supply, such as in power plants, industrial production facilities, and distribution networks. Installation typically occurs in routes that comply with the requirements of relevant standards and regulations. Outdoor use requires special protective measures, particularly against direct sunlight, as specified in VDE 0276.
Functions and Features in Detail
The cable features a single-core construction with a conductor cross-section of 240 mm² and a protective conductor cross-section of 25 mm². The designation N2XSY refers to a cable with XLPE (cross-linked polyethylene) insulation, designed for use in medium-voltage networks. The designation RT indicates a special version optimized for specific requirements regarding mechanical and thermal load capacity. The cable construction ensures high electrical insulation and resistance to mechanical stresses as well as environmental influences.
Technology Explained Simply
The designation N2XSY describes the cable type: N stands for low voltage (here used in the medium-voltage range), 2X for two conductors (here: one main conductor and one protective conductor), S for the protective sheath, and Y for XLPE insulation. The voltage class 6/10 kV means the cable is designed for an operating voltage up to 6 kV and a test voltage of 10 kV. The designation RT refers to a special version designed for increased requirements regarding mechanical strength and thermal load capacity. The XLPE insulation offers high heat resistance and electrical strength, extending the cable’s service life.
Compatibility and Accessories
The cable is designed for use in existing and new medium-voltage networks. It can be used in combination with suitable cable glands, end glands, cable lugs, and other connection elements designed for the respective voltage class and cross-section. Installation requires compliance with VDE 0276, particularly regarding protective measures against direct sunlight. The use of protective conduits or other protective measures is recommended to extend the cable’s service life.
Installation and Mounting
Installation is typically carried out by professionally trained specialists. Underground installation requires compliance with VDE 0276 regulations, particularly regarding minimum depth, protective measures, and avoidance of direct sunlight. For indoor or cable duct installations, relevant electrical and building regulations must be observed. Outdoor installation requires special protective measures, particularly against UV radiation, which can be achieved through additional covering or installation within protective conduits.
Operational Advantages
The cable offers high reliability and longevity due to its robust XLPE insulation and mechanically stable construction. Its good installation properties facilitate easy handling even in complex route configurations. Use in medium-voltage networks ensures stable power supply with low losses. Compliance with VDE 0276 and the use of appropriate protective measures ensure safe and durable operation of the cable throughout its entire lifecycle.