| General |
| Cable type | N2XCH - |
| Cross-section of conductors (3x) | 95 mm² |
| Cross-section of protective conductor | 50 mm² |
| Degree of protection | Halogen-free, low smoke - |
| Installation method | in air, in concrete - |
| Type of delivery | Cut length - |
This product is a halogen-free power cable with type designation N2XCH 04X95/50 SW, manufactured by Faber Kabel. It is a cable intended for indoor use, suitable for installation in air or in concrete structures. The cable is specifically designed for applications requiring reduced smoke emission and improved fire behaviour, achieved through the use of halogen-free insulating and protective materials. The designation N2XCH identifies a halogen-free, low-smoke cable with a specific construction intended for use in electrical installations indoors.
Applications
This cable is intended for installation indoors, particularly in air ducts, on supports, or in concrete. It is not suitable for direct installation in earth or water, as the construction does not provide sufficient mechanical or water-resistant protective layer for such environments. Typical applications include buildings where high fire safety is required, such as office buildings, hospitals, or public facilities.
Functions and Features in Detail
The cable features halogen-free insulation that does not release toxic halogen compounds at high temperatures or during a fire. The low-smoke property reduces smoke emission, improving visibility during a fire and facilitating evacuation. The designation 04X95/50 SW describes the construction: it is a cable with four conductors, three of which have a cross-section of 95 mm² each, and the fourth conductor (protective earth conductor) has a cross-section of 50 mm². The designation SW stands for cut length, meaning the cable is cut and delivered to the desired length, rather than being supplied on a reel.
Technology Explained Simply
The type designation N2XCH is a standard designation according to DIN VDE 0880, used for halogen-free, low-smoke cables. The numbers 04X95/50 SW indicate the number of conductors (four), the cross-sections of individual conductors (three with 95 mm², one with 50 mm²), and the delivery form (cut length). The use of halogen-free materials ensures that no toxic gases are released during a fire, increasing safety within the building. The construction is designed for indoor use, with mechanical strength and electrical conductivity sufficient for the intended applications.
Compatibility and Accessories
The cable is designed for use in indoor electrical installations and can be installed using standard installation techniques. It is compatible with common cable protection conduits, cable ducts, and connection elements intended for power installations. Installation is carried out in air or in concrete, where the mechanical strength of the cable is sufficient for these environments.
Installation and Mounting
Installation is carried out in the usual manner for power cables. The cable can be installed in air, for example on supports or in cable ducts, or embedded in concrete. Installation in earth or water is not permitted, as the construction does not provide sufficient protection against moisture or mechanical stress. The cut length allows for precise delivery to required dimensions, minimizing material waste.
Operational Advantages
The use of the halogen-free cable N2XCH 04X95/50 SW provides increased safety during operation, especially in the event of fire. Reduced smoke emission and avoidance of toxic gases contribute to better evacuation conditions and increased safety for persons in the building. The electrical properties of the cable are suitable for use in power installations, with cross-sections of 95 mm² and 50 mm² dimensioned for the respective loads. Installation indoors is straightforward, with mechanical strength sufficient for the intended environments.