| General |
| Cable type | N2XH-J 04X25 SW |
| Conductor cross section | 25 mm² |
| Degree of protection | Halogen-free, low smoke |
| Installation method | indoors, in air, in concrete |
| Installation in ground | not permitted |
| Installation in water | not permitted |
| Insulation | halogen-free |
| Protective barrier | SW |
The product is a halogen-free power cable with type designation N2XH-J 04X25 SW, manufactured by Faber Kabel. It is a cable intended for indoor use, suitable for installation in air as well as in concrete structures. The cable is not intended for direct installation in earth or in water. It features improved performance in case of fire, as it is halogen-free and low-smoke, which reduces smoke development and the release of toxic gases in the event of a fire. The designation N2XH-J refers to a halogen-free, fire-resistant cable with a specific insulation and protective sheath, designed for electrical energy transmission in buildings and industrial facilities.
Applications
This cable is intended for indoor use, particularly in buildings where high fire protection requirements apply, such as office buildings, hospitals, or industrial facilities. It can be installed in air, for example in ducts or on cable trays, as well as embedded in concrete. Direct installation in earth or water is not permitted, as the cable is not designed for these environments. It is typically used in electrical installations for powering devices, machines, or lighting systems.
Functions and Features in Detail
The cable features halogen-free insulation that does not release halogen-containing gases at high temperatures. This is especially important in enclosed spaces to minimize smoke development and the formation of toxic fumes. The designation 04X25 SW describes the construction: it is a 4-core cable with a cross-section of 25 mm² per conductor, where SW indicates a special protective sheath suitable for installation in concrete. The conductors are made of copper, ensuring high electrical conductivity and mechanical strength.
Technical Explanation
The type designation N2XH-J 04X25 SW refers to the standardization and construction of the cable. N2XH-J is a designation according to DIN VDE 0880, used for halogen-free, fire-resistant cables. The digits 04X25 indicate that the cable has four conductors, each with a cross-section of 25 mm². The designation SW stands for a special protective sheath designed for installation in concrete. The halogen-free insulation ensures that no toxic halogen compounds are formed in case of fire, increasing safety within the building. The cable construction is designed to meet requirements for electrical conductivity, mechanical strength, and fire protection performance.
Operation
The cable is designed for continuous operating temperature, which should not be exceeded during normal operation. Installation takes place indoors, with environmental conditions such as humidity and temperature to be considered. Installation in concrete requires careful planning to ensure mechanical stress and heat dissipation are managed. The cable is not suitable for outdoor use or in damp environments, as it is not waterproof. Its use in electrical installations typically involves integration with other components such as distributors, switches, or sockets, which must also comply with relevant standards.
Compatibility and Accessories
The cable is designed for use in electrical installations executed according to applicable standards such as DIN VDE 0100 or DIN VDE 0880. It can be combined with other components such as distributors, switches, or sockets, which must also be rated for the same voltage class and power. Installation typically occurs in conjunction with cable ducts, ducts, or in concrete, with respective mounting instructions to be followed. There are no specific accessories directly associated with this cable, as it is a standard cable intended for integration into existing installations.
Installation and Mounting
Installation takes place indoors, with cables laid in air, for example on cable trays or in ducts, or embedded in concrete. Installation must comply with applicable regulations and standards, particularly regarding minimum clearances, bending radii, and mechanical stress. Bending radii must be at least 10 times the outer diameter of the cable to avoid damage. Installation in concrete requires careful planning to ensure mechanical strength and heat dissipation. Cable connections are typically made using cable lugs or cable glands, which must also comply with relevant standards.
Operational Advantages
The cable offers high electrical conductivity due to copper conductors with a cross-section of 25 mm². The halogen-free insulation provides improved fire protection performance, as no toxic gases are released in case of fire. Installation in concrete enables a mechanically stable and durable installation, meeting requirements in industrial and commercial facilities. Use in indoor environments provides high safety and reliability, especially in buildings with high fire protection requirements. The cable construction is designed to meet requirements for electrical conductivity, mechanical strength, and fire protection performance.