General
Nominal voltage	24–250 V AC
Frequency range	DC up to 63 Hz
Nominal current	10 A
Leakage current	1,1 mA
Degree of protection	IP20
Construction	Plastic housing
Mounting	DIN rail TS-35
Climate category	25/085/21
Approvals	CE, UL
Standards	EN 60939, UL 1283, CSA 22.2 No. 8, RoHS

The single-phase EMC power line filter from EPA, type 5001F010DIN1, is a compact compact filter for mounting on DIN rail (TS35) and is designed to suppress conducted high-frequency disturbances in the electrical network. It is specifically designed for applications where electronic devices such as switch-mode power supplies, frequency converters, energy-saving lamps or LED lighting act as sources of interference and may cause unwanted voltage and current disturbances in the network. These disturbances can lead to malfunctions or damage to sensitive consumers. The filter attenuates network-side harmonics and protects the downstream consumer from such network back-effects.

Applications

The power line filter is suitable for use in industrial, commercial and technical installations where electronic loads with high susceptibility to interference are connected. It is particularly used in enclosures, control systems or for supplying IT and communication technology, where stable and interference-free power supply is required. Mounting on the DIN rail enables quick and standardized integration into existing control systems.

Functions and equipment in detail

The filter operates as a 1-stage compact filter and provides high attenuation in the frequency range from DC to 63 Hz. It is rated for a nominal current of 10 A and can be operated at an ambient temperature of 50°C. The shock-protected terminals ensure a safe and reliable connection of the conductors. The compact plastic housing protects the internal components and enables space-saving installation.

Technology explained simply

The filter reduces electrical disturbances caused by rapid switching operations in electronic devices. These disturbances propagate through the power lines and can affect other devices. The filter acts as a barrier, attenuating disturbances in the frequency range up to 63 Hz without impairing the necessary power supply. The nominal voltage of 24–250 V AC (±10%) makes it suitable for a wide range of connection options, both in low-voltage installations and in installations with higher voltage. The climate category 25/085/21 (−25°C to +85°C) indicates the thermal load capacity of the device, enabling its use even in environments with significant temperature fluctuations.

Compatibility and accessories

The filter is designed for mounting on DIN rail TS35 (EN 50022) and thus fits into standard control systems. It complies with standards EN 60939, UL 1283, CSA 22.2 No. 8 and RoHS. The certifications CE and UL confirm safety and quality standards. The protection rating IP20 protects against contact with fingers and larger objects, but is not suitable for outdoor use or in damp environments.

Mounting and installation

Mounting is done by simply clipping onto the DIN rail. The terminals are designed for connecting the conductors and enable a secure electrical connection. No additional mounting aids or tools are required. The dimensions of 90 × 36 × 59 mm (L×W×H) allow for compact placement in enclosures.

Advantages in operation

Using the filter improves the functionality and reliability of connected devices by minimizing disturbances in the network. Reducing failures and damage to sensitive electronic components lowers maintenance and repair costs. The high attenuation and compliance with international standards ensure safe and reliable operation in various application scenarios. The shock-protected terminals and robust plastic housing increase safety during installation and in operation.