Eltako 70000008, EAN: 4010312900970

Eltako 70000008 GLE basic load element parallel

Installation > Modular devices / equipment installation > Impulse switch / relay

Eltako 70000008 GLE basic load element parallel

Lieske Part No. 738426
Mfg Part No 70000008
EAN-Code 4010312900970
Manufacturer Eltako
Here only 7,25 EUR
8,63 EUR incl. VAT

Further information for Eltako 70000008 GLE basic load element parallel

General
Cold resistance3500 Ω
Inrush current at 230V65 mA
Power loss after 60 seconds0,65 W
The Eltako GLE basic load element is a specially developed component for integration into electrical installations, particularly in conjunction with field-free switches. It serves as an auxiliary load to enable the detection of consumers that, due to their low power consumption or special switching technology (e.g. electronic transformers, dimmer circuits, fluorescent lamps), do not provide sufficient load for the self-switching of a field-free switch. The GLE is connected in parallel to the actual consumer and ensures that the switch correctly detects the mains voltage and switches accordingly. It is not capable of holding the field-free switch in the on position without an additional consumer.

Applications

The basic load element is used in electrical installations where consumers with low standby power or special switching technologies are connected. Typical applications include lighting systems with electronic ballasts, dimmable luminaires, or devices with low power consumption in standby mode. In such cases, the GLE can generate the necessary load to activate the switching logic of the field-free switch. It is intended for use in switch boxes, junction boxes, or directly in the consumer, with installation in a closed housing recommended.

Functions and Equipment in Detail

The GLE consists of a PTC resistor (Positive Temperature Coefficient) housed in a small sleeve and equipped with connection leads. The PTC resistor increases its resistance with rising temperature, limiting power loss after switching on. This prevents excessive current draw and protects the installation from thermal stress. The function of the GLE is designed to generate sufficient load to activate the field-free switch, without significantly increasing the overall power consumption of the installation.

Technology Explained Simply

When the installation is switched on, a current of 65 mA at 230 V flows through the GLE, corresponding to a power of approximately 15 W. This current is sufficient to detect and activate the field-free switch. After 60 seconds, the PTC resistor has heated up and power loss drops to 0.65 W. This value is low and causes no significant additional load on the installation. The cold resistance of the element is 3500 Ω, determining the initial current draw. The values are dimensioned to support the function of the field-free switch without impairing the energy efficiency of the installation.

Compatibility and Accessories

The GLE is specifically designed for use with field-free switches and must be connected in parallel to the respective consumer. It is not suitable for use without an additional consumer, as it cannot hold the field-free switch in the on position by itself. It is used in conjunction with electrical consumers that, due to their technology (e.g. electronic transformers, dimmers), are not sufficiently detected. No additional accessories are required, as the GLE is designed as a standalone component.

Mounting and Installation

Installation is carried out directly in the consumer, in a switch or junction box. The connection leads of the GLE are connected in parallel to the consumer. Installation should take place in a closed housing to ensure electrical safety. No special tools are required, as the connection leads are directly connected to existing wiring. Correct polarity must be observed to ensure a safe and functional connection.

Operating Advantages

The GLE enables reliable switching functionality of field-free switches, even with low-power consumers. The low power loss after heating (0.65 W after 60 seconds) ensures energy-efficient operation. The use of PTC technology ensures thermal limitation of current draw, increasing the safety of the installation. The compact design and direct mounting in existing installations simplify integration without additional effort.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/738426
qrcode für Eltako 70000008 GLE basic load element parallel