Eltako 61100604, EAN: 4010312603055

Eltako 61100604 MFZ61DX-UC Multifunction Timer Analog

Installation > Modular devices / equipment installation > Staircase time switch / time relay

Eltako 61100604 MFZ61DX-UC Multifunction Timer Analog

Lieske Part No. 345534
Mfg Part No 61100604
EAN-Code 4010312603055
Manufacturer Eltako
Here only 59,92 EUR
71,30 EUR incl. VAT

Further information for Eltako 61100604 MFZ61DX-UC Multifunction Timer Analog

General
Control extra function(s)RV, AV, TI, IA, EW, AW
Switching power10 A
Operating voltage250 V AC
Control voltage8..230 V UC
Delay time0.5 seconds to 1 hour
LED lamp load200 W
Incandescent lamp load2000 W
Stand-by loss0,02-0,4 W
Relay typeBistable
Mounting dimensions45x45x18 mm
Duplex technologyYes
The Eltako MFZ61DX-UC is a multifunction timer relay for flush mounting, designed for use in electrical installations for time-controlled operation of loads such as lamps or small electrical devices. It features a potential-free switch with a rated load of 10A/250V AC and is designed for controlling 230V LED lamps up to 200W and incandescent lamps up to 2000W. The maximum load power, however, depends on the set delay or pulse time: for times up to 2 seconds, the maximum load is 15 %, up to 2 minutes 30 %, up to 5 minutes 60 %, and from 5 minutes onwards the full load can be used. The device is intended for use in installation circuits, particularly in systems with stairway lighting or time-controlled lighting functions.

Applications
This timer relay is suitable for applications requiring delayed or pulsed switching functions, for example in residential and commercial buildings for automated lighting control. It can be mounted in enclosures or distribution boxes, where it is supplied with a universal control voltage of 8 to 230V UC. The supply voltage corresponds to the control voltage, enabling flexible integration into existing electrical systems. The mounting dimensions are 45 mm length, 45 mm width, and 18 mm depth, making it suitable for standard installation switches.

Functions and Equipment in Detail
The device offers several switching functions, which can be selected and adjusted via an analog adjustment knob: RV (delayed reset), AV (delayed activation), TI (pulse generator starting with impulse), IA (impulse-controlled delayed activation), EW (on-delay switch), and AW (off-delay switch). The timing range is adjustable from 0.5 seconds up to one hour. The Eltako Duplex Technology (DX) enables switching at the zero crossing of the alternating voltage (230V/50Hz), thereby reducing contact wear. For this, the N conductor must be connected to terminal (N) and the L conductor to 1(L). This results in an additional standby loss of only 0.1 watt.

Technology Explained Simply
The hybrid technology combines a wear-free electronic control with a special relay designed for high loads. The relay is bistable, meaning it consumes no coil power in the on state and thus causes no unwanted heating. The total standby loss is between 0.02 and 0.4 watts, ensuring energy-efficient operation. After installation, a short automatic synchronization is required, which must be awaited before connecting the load to the network.

Compatibility and Accessories
The device is designed for use with 230V alternating voltage and can operate with various load types, provided the above-mentioned load limits are observed. No special accessories are required, as the functions are implemented via the integrated control. Compatibility is ensured as long as the supply voltage is within the range of 8 to 230V UC.

Mounting and Installation
Mounting is carried out in standard installation switch boxes or enclosures. The mounting dimensions (45x45x18 mm) conform to common standards for modular installation devices. The terminals are clearly labeled, with the N conductor to be connected to (N) and the L conductor to 1(L) to utilize the Duplex Technology. Electrical connections are made via screw terminals designed for the specified conductor cross-sections.

Operational Advantages
Thanks to the bistable relay technology and zero-crossing switching, contact wear is minimized, extending the device’s service life. The low standby loss ensures energy-efficient operation, especially in systems that remain in standby mode for extended periods. The wide range of switching functions allows flexible adaptation to different requirements in building automation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/345534
qrcode für Eltako 61100604 MFZ61DX-UC Multifunction Timer Analog