ER61-UC 1 changeover contact potential-free 10 A/250V AC, incandescent lamps 2000W. No standby loss.
1 changeover contact potential-free 10 A/250V AC, incandescent lamps 2000 W. No standby loss. For recessed installation. 45mm long, 45mm wide, 18mm deep. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Universal control voltage 8..230 V UC. Very low switching noise. By using a bistable relay, there is no coil power loss and no heating, even when switched on. The relay contact can be open or closed during commissioning and synchronizes itself the first time it is pressed. This relay is not suitable for feedback with the switching voltage of a dimmer switch. For this purpose, only use the relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC. The electronics have no power supply of their own and therefore no standby loss. Only when the control contact closes is the microcontroller activated, which switches the bistable relay in the correct direction. When the control contact opens or the control voltage drops, it switches back.