Wireless output module for button telegrams for FTS14 systems with FTS14EM and/or FTS14TG. Standby loss only 0.5 watts. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 1 division unit = 18mm wide, 58mm deep. Connection to the Eltako RS485 bus. Cross-wiring of bus and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. A rotary switch determines which group of FTS14EM or FTS14TG the FTS14FA belongs to. A maximum of 8 FTS14FAs can be connected to a bus in this way. Each button telegram of an FTS14EM or FTS14TG is sent to the Eltako building radio with its own ID. Rotary switch on the FTS14FA in position 1: Sends telegrams from all FTS14EMs that are set to 1. Rotary switch on the FTS14FA in position 101: Sends telegrams from all FTS14EMs that are set to 101. Rotary switch on the FTS14FA in position 201: Sends telegrams from all FTS14EMs that are set to 201. Rotary switch on the FTS14FA in position 301: Sends telegrams from all FTS14EMs that are set to 301. Rotary switch on the FTS14FA in position 401: Sends telegrams from all FTS14EMs that are set to 401. Rotary switch on the FTS14FA in position TG2/5: Sends telegrams from all FTS14TGs that are set to 2 or 5. Rotary switch on the FTS14FA in position TG3/6: Sends telegrams from all FTS14TGs that are set to 3 or 6. Rotary switch on the FTS14FA in position TG4/7: Sends telegrams from all FTS14TGs that are set to 4 or 7. Rotary switch on the FTS14FA in the OFF position: The FTS14FA is switched off. The green LED under the rotary switch flashes briefly when a radio telegram is sent. Telegrams from a FAM14 are not sent by the FTS14FA.