Power booster for universal dimmer switch FUD14/800W, Power MOSFET up to 400W. Standby loss only 0.1 watts. Modular device for mounting on DIN-EN 60715 TH35 rail. 1 division unit = 18mm wide, 58mm deep. FLUD14 power boosters can be connected to the FUD14/800W universal dimmer switch, increasing the switching capacity by up to 200W for one light, and by up to 400W for additional lights per power booster, depending on the ventilation conditions. The two circuits for increasing the power can be carried out with several FLUD14s at the same time. Supply voltage 230V. No minimum load required. Automatic electronic overload protection and overtemperature shutdown. The lamp type of a FLUD14 power booster can differ from the lamp type of the FUD14/800W universal dimmer switch in the power booster circuit with additional lights. This makes it possible to mix capacitive loads and inductive loads.