Radio repeater adapter plug 1 and 2 levels. 100x55x45mm (dimensions without plug), pure white. Standby loss only 0.7 watts. Smart home repeater. Adapter plug for German safety sockets with increased contact protection. The safety socket (16A) is directly connected to the safety plug, so no power socket is blocked. This repeater is only required if the structural conditions prevent uninterrupted reception or the distance between the sensor and actuator is too great. The 2-level mode is active as a factory setting. In addition to the radio signals from sensors, the radio signals from another 1-level repeater are also processed. A radio signal can thus be received and amplified a maximum of 2 times. You can switch to 1-level mode by unplugging and plugging it in several times. Now only the radio signals from sensors are received and amplified. Radio signals from other repeaters are ignored in order to reduce the amount of data. Activate 1-level mode: Within 10 seconds, briefly unplug and plug the adapter 3 times at one-second intervals. Activate 2-level mode: Within 20 seconds, briefly unplug and plug the adapter 5 times at one-second intervals. Radio repeaters do not need to be taught in. They receive and amplify the radio signals from all radio sensors in their reception area.