Eltako 23100831, EAN: 4010312401460

Eltako 23100831 TLZ12G-230V+UC stair light timer switch silent

Installation > Modular devices / equipment installation > Staircase time switch / time relay

Eltako 23100831 TLZ12G-230V+UC stair light timer switch silent

Lieske Part No. 635495
Mfg Part No 23100831
EAN-Code 4010312401460
Manufacturer Eltako
Here only 64,25 EUR
76,46 EUR incl. VAT

Further information for Eltako 23100831 TLZ12G-230V+UC stair light timer switch silent

General
Degree of protectionnon-isolated
Switching power LED/ESL400 W
Switch capacity incandescent lamps400 W
Control, supply and switching voltage230 V
Universal control voltage8..230 V
Time setting1 to 30 minutes
Stand-by loss0,4 W
Neon lamp current50 mA
MountingDIN-EN 60715 TH35
Pitch unit1 TE
FunctionsTLZ, ES, ER, ESV
Constant light off-time60 minutes
Forgotten constant light off-time120 minutes
CircuitZero-crossing
Double connectorsfor pushbuttons and lamps
Pump functionup to 3 times
ESV time values1=2min, 2=5min, 3=10min, 4=15min, 6=25min, 8=35min, 10=45min, 12=60min, 20=90min, 30=120min
Pre-warning of switching-offYes
Push-button constant lightYes
Automatic circuit type detectionYes
The Eltako TLZ12G-230V+UC is a noiseless rail-mounted device for controlling staircase and corridor lighting. It is a solid-state relay that does not operate in a potential-free manner and is designed for switching 230V LED lamps, energy-saving lamps (ESL) up to 400W, and incandescent lamps up to 400W. The device is intended for mounting on a support rail according to DIN-EN 60715 TH35 and occupies a mounting unit of 18 mm width and 58 mm depth. Switching occurs at zero crossing, which protects the lamp life and ensures disturbance-free operation. The control, supply, and switching voltage is 230V, supplemented by a galvanically isolated universal control voltage in the range of 8 to 230V UC. This enables integration into various switching configurations, particularly in 3- and 4-wire circuits, where the function can be connected in series and supports attic lighting in 4-wire circuits. The switching type is automatically detected, simplifying installation.

Applications
This device is primarily intended for controlling lighting in stairwells, corridors, entrance areas, and other areas requiring temporary lighting. Its multifunctionality allows use in various operating modes: as a staircase light timer (TLZ), power impulse switch (ES), relay (ER), or power impulse switch with delayed reset (ESV). In ESV mode, the times (t) set via the central rotary switch correspond to fixed values: 1 = 2 min, 2 = 5 min, 3 = 10 min, 4 = 15 min, 6 = 25 min, 8 = 35 min, 10 = 45 min, 12 = 60 min, 20 = 90 min, 30 = 120 min. After the set delay time has elapsed, the device switches off automatically, unless a manual off command has been issued.

Functions and Equipment in Detail
Precise time setting is possible in the range of 1 to 30 minutes with a minute scale. A large rotary switch is used to set the permanent lighting. When the switch-off warning is activated, the lighting flickers approximately 30 seconds before the end of the set time, three times in increasingly shorter intervals. The push-button permanent lighting can be activated by holding the button for more than 1 second; it switches off automatically after 60 minutes or can be manually switched off by holding the button for more than 2 seconds. If both functions are activated, the switch-off warning is triggered only after the permanent lighting has been switched off. When switching energy-saving lamps (ESL), the switch-off warning and push-button permanent lighting must be set on the right side of the rotary switch to protect lamp life. Within the first second after switching on or re-activating, the time can be extended by up to three short presses (pumping); each press adds the set time. Forgotten permanent lighting is automatically switched off after 2 hours.

Technology Explained Simply
The device uses solid-state technology, which has no mechanical contacts and therefore operates silently. This is particularly advantageous in residential and office buildings, where noise disturbances should be avoided. Zero-crossing switching minimizes lamp stress, especially for energy-saving lamps, and reduces interference with the mains voltage. The galvanic isolation of the universal control voltage (8–230V UC) allows flexible integration into existing circuits without requiring an additional voltage supply. Standby power consumption is only 0.4 W, minimizing energy consumption in standby mode. The dual terminals for switch and lamp allow flexible connection options—either top and bottom or bottom only.

Compatibility and Accessories
The device is suitable for 3- and 4-wire circuits and can be connected in series. Automatic detection of the switching type simplifies installation. The neon lamp current is up to 50 mA, with the actual current depending on the ignition voltage of the neon lamp used. Multifunctionality enables use in various application scenarios, with functions ES, ER, and ESV switchable via the rotary switch. The switch-off warning and push-button permanent lighting functions are also available in ESV mode.

Mounting and Installation
The device is mounted on a DIN-EN 60715 TH35 support rail. Mounting occupies a unit of 18 mm width and 58 mm depth. The terminals are designed to allow flexible wiring, with dual terminals for switch and lamp providing optional top and bottom or bottom-only connection. Automatic detection of the switching type reduces installation complexity.

Advantages in Operation
Operation is silent, increasing acceptance in living and working spaces. Zero-crossing switching protects lamps, especially energy-saving lamps, and extends their lifespan. Multifunctionality offers flexibility in use, and features such as switch-off warning and push-button permanent lighting enhance user-friendliness. The low standby power consumption of 0.4 W reduces energy consumption when not in use. Automatic detection of the switching type and flexible connection options simplify installation and maintenance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/635495
qrcode für Eltako 23100831 TLZ12G-230V+UC stair light timer switch silent