Further information for Eltako 22100055 R12-100-24V DC Relay 16A
General
Switching type
1-pole
Nominal current
16 A
Nominal voltage
250 V AC
Control power
1,9 W
Control voltage
24 V DC
Contact arrangement
1 make contact (NO)
Contact spacing
3 mm
Test voltage contact/contact
2000 V
Test voltage control connections/contact
4000 V
Working time
100 %
Mounting method
DIN-EN 60715 TH35
Built-in width
18 mm
Compatibility
ER12DX-UC, ER12-200-UC, ER12-110-UC
Switch position indicator
Manual operation
The Eltako switching relay R12-100-24V DC is a 1-pole rail-mounted device for installation on a support rail according to DIN-EN 60715 TH35. It is designed for electrical control of loads up to 16A/250V AC and is intended for use in electrical installations, particularly in enclosures or distribution boxes. The device features manual operation and a switching position indicator, which visually displays the current state of the relay. The mounting width is 18 mm, equivalent to one module unit, and the depth is 55 mm. The duty cycle is specified as 100 %, meaning the relay can be continuously loaded without thermal or mechanical overload.
Applications
This relay is suitable for use in industrial and commercial electrical installations where reliable and mechanically robust switching functionality is required. It can be used, for example, to control lighting, heating, pumps, or other electrical consumers. The switching position indicator allows for quick visual inspection of the operating status, which is beneficial during maintenance or troubleshooting. Mounting on a DIN rail simplifies integration into existing enclosures and enables modular expansion of the system.
Functions and Equipment in Detail
The device features a single make contact configuration, closing the circuit when actuated. The contact gap is 3 mm, ensuring sufficient insulation between contacts. The test voltage between contacts is 2000 V, while the test voltage between control terminals and contacts is 4000 V. These values ensure electrical safety and prevent breakdowns under operating conditions. Manual operation allows for manual switching independent of the control voltage, which is useful in emergencies or during maintenance.
Technology Explained Simply
The relay is operated by a control power of 1.9 W supplied via the control terminals. The control voltage is 24 V DC, which is common in many industrial installations. The universal control voltage UC, used in compatible electronic relays such as ER12DX-UC, ER12-200-UC, and ER12-110-UC, covers a voltage range of 12–230 V AC (50–60 Hz) and 12–230 V DC. This enables flexible integration into various control systems. The relay is designed for continuous loading, as the duty cycle is 100 %.
Compatibility and Accessories
The Eltako R12-100-24V DC is connection-compatible with electronic switching relays ER12DX-UC, ER12-200-UC, and ER12-110-UC. These relays can replace the mechanical relay when electronic control or higher switching frequency is required. The same mounting width and identical connection configuration allow direct interchangeability without modifying the control circuit.
Mounting and Installation
Installation is on a DIN rail according to DIN-EN 60715 TH35, commonly used in electrical installations. The mounting width of 18 mm corresponds to one module unit, simplifying planning and positioning in enclosures. The switching position indicator is directly mounted on the device and displays the status without requiring additional measuring instruments.
Advantages in Operation
The relay provides a mechanically robust and reliable switching function with high operational safety. The switching position indicator enables quick status checks, and the 100 % duty cycle ensures continuous use without thermal stress. Compatibility with electronic relays allows flexible adaptation to different requirements without changing the mechanical mounting. The use of 24 V DC as control voltage is common in many industrial and commercial installations, facilitating integration into existing systems.