Eltako 21100030, EAN: 4010312100479

Eltako 21100030 Surge Switch 1S 16A

Installation > Modular devices / equipment installation > Impulse switch / relay

Eltako 21100030 Surge Switch 1S 16A

Lieske Part No. 966117
Mfg Part No 21100030
EAN-Code 4010312100479
Manufacturer Eltako
Here only 31,22 EUR
37,15 EUR incl. VAT

Further information for Eltako 21100030 Surge Switch 1S 16A

General
Switching power16 A
Operating voltage230 V AC
Switching voltage250 V AC
Working time100 %
Control power requirement5-6 W
Contact type1 make contact (NO)
Contact spacing3 mm
Spacing between control terminals/contact> 6 mm
Mounting methodDIN-EN 60715 TH35
Number of division units1
The Eltako power impulse switch S12-100-230V is a 1-pole, mechanical switch for use in electrical installations. It is designed for mounting on a DIN-EN 60715 TH35 support rail and is suitable as a modular device in enclosures or distribution boxes. The device features manual operation and a switching position indicator, which visually shows the current state of the contact. With a width of 18 mm (equivalent to one module width) and a depth of 55 mm, it fits standard installation rails and allows for compact arrangement of multiple devices side by side.

Applications

The power impulse switch is typically used in industrial or commercial electrical installations where mechanical control of loads is required. It is suitable for applications requiring high switching capacity and reliability, for example, for controlling motors, heating systems, or lighting systems. The switching capacity is 16 A at 250 V AC, making it usable for a wide range of consumers in the medium-voltage range. The 100 % duty cycle means the device can also be operated under continuous current flow without thermal overload or damage to the contacts.

Functions and equipment in detail

The device features a single make contact, which closes the circuit when the lever is actuated. The contact gap is 3 mm, ensuring sufficient electrical insulation. The distance between the control terminals and the main contacts is greater than 6 mm, enhancing electrical safety and minimizing the risk of spark overvoltage. Manual operation is performed via a mechanical lever directly mounted on the device. The switching position indicator shows whether the contact is closed or open, which is helpful during commissioning and maintenance.

Technology explained simply

The power impulse switch is operated with a control voltage of 230 V AC, with a control power requirement between 5 and 6 W. This value is typical for mechanical relays of this power class and ensures reliable switching even with minor voltage fluctuations. The operating voltage is fixed at 230 V AC, making it suitable for use in standard networks. The mechanical construction ensures long service life and high switching stability, especially under frequent operation.

Compatibility and accessories

The S12-100-230V is connection-compatible with electronic power impulse switches from the Eltako ES12DX-UC, ES12-200-UC, and ES12-110-UC series. These devices feature a universal control voltage UC, covering voltage ranges of 12 to 230 V AC (50–60 Hz) and 12 to 230 V DC. The mechanical mounting and terminal assignment are identical, allowing replacement or expansion of the control unit without modifying the switching installation. This compatibility enables flexible expansion of existing installations.

Mounting and installation

Mounting is done on a DIN-EN 60715 TH35 support rail, which is standard in electrical installations. The device is secured to the rail using integrated clamps or brackets. Connections for control and load are accessible via screw terminals, ensuring a secure and durable connection. Installation does not require special tools, but compliance with electrical safety regulations and correct wiring according to applicable standards is mandatory.

Advantages in operation

The power impulse switch offers high mechanical stability and reliability during frequent switching operations. The clear switching position indicator simplifies diagnosis and maintenance. The compact design enables efficient space utilization in enclosures. Compatibility with electronic variants provides future expansion options without changing the mechanical installation. The 100 % duty cycle makes the device suitable for continuously loaded applications as well.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/966117
qrcode für Eltako 21100030 Surge Switch 1S 16A