| General |
| Housing | real glass, plastic, metal |
| Colour indication | 34 mm × 34 mm |
| Housing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection (after installation) | IP20 |
| Dimensions (W × H × D) | 55mm × 55mm × 35mm |
| Mounting ring (W × H) | 71 mm × 71 mm |
| Installation depth | ≈ 7mm |
| Weight total | ≈ 55g |
| Ambient temperature | 0…+45°C |
| rH (relative humidity), non-condensing | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | 115 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 30mA |
| KNX terminal connection wire diameter | Ø 0,6...0,8 mm s |
| Connection KNX plug-in terminals stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5s |
| Sensors |
| CO2 measurement range | 400...5000 ppm |
The Elsner Cala KNX IL CO2 is an integrated LED light signal for visual indication of indoor air quality. The device features an integrated CO2 sensor that measures the carbon dioxide concentration in the air and adjusts the color of the illuminated surface accordingly. The indication is displayed in the colors green, yellow, or red, with the color either permanently lit or flashing, depending on the selected operating mode. The color coding serves as a visual feedback for room air quality and supports decision-making for ventilation measures. The device belongs to the Cala KNX IL CO2 product series and is installed in a 55 mm frame matching the switch series used in the building, ensuring seamless integration into interior fittings.
Applications
The device is designed for use in indoor environments where continuous air quality monitoring is required, for example in offices, schools, hospitals, or public facilities. The CO2 indication not only provides information but also enables automatic control of ventilation systems via the KNX network. The function to calculate a mixed value from the internally measured CO2 value and a value received via the bus allows for a representative display of the room condition, especially in larger rooms or with multiple sensors. This is particularly useful to ensure a representative air quality indication for the entire room.
Functions and Equipment in Detail
The CO2 sensor measures in the range of 400 to 5000 ppm. The indication is displayed via an LED surface with dimensions 34 mm × 34 mm. The color coding is controlled by the measured CO2 concentration, with the threshold values for color changes being configurable. Additionally, the device can receive external values via communication objects and take them into account in the display. The KNX application offers a variety of functions: the CO2 value can control switching outputs depending on thresholds, AND and OR logic gates can link states, and setpoint comparators enable the output of minimum, maximum, or average values. Configuration is performed via KNX software starting from ETS 5.
Technology Explained Simply
The device operates in the KNX network via the medium TP1-256 and supports the configuration mode S-Mode. The nominal voltage is 30 V DC SELV, and the current consumption is up to 30 mA. The connection terminals for the KNX bus are designed for conductors with a diameter of 0.6 to 0.8 mm, requiring a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds before data can be received. The maximum number of group addresses and assignments is 254 each, and 115 communication objects are available. The overvoltage category III and pollution degree 2 indicate use in indoor environments where no extreme electrical or mechanical stresses occur.
Compatibility and Accessories
The device is designed for use in the KNX system and requires a suitable 55 mm frame matching the switch program used in the building. Installation is carried out in a weatherproof device box according to DIN EN IEC 60670-1 / DIN 49073. The device itself consists of real glass, plastic, and metal and is available in housing colors RAL 9010 (white) and RAL 9005 (black). The housing coloration corresponds to the mentioned RAL colors. The display surface is 34 mm × 34 mm in size.
Mounting and Installation
Mounting is performed in a 55 mm frame, with the device's mounting depth being approximately 7 mm. The mounting ring has dimensions of 71 mm × 71 mm. The device is intended for indoor mounting, with ambient temperatures ranging from 0 °C to +45 °C. Relative humidity may reach up to 95 %, provided no condensation occurs. Storage temperature ranges from 25 °C to +70 °C. The protection rating after installation is IP20, which provides protection against contact with fingers and against solid foreign objects, but not against water or dust.
Advantages in Operation
The device enables continuous, visual monitoring of air quality and supports the automatic control of ventilation systems. Integrated logic functions such as AND/OR gates and setpoint comparators extend functionality beyond simple indication. The ability to calculate mixed values from internal and external CO2 values increases the accuracy of room air monitoring. Configuration via ETS 5 allows flexible adaptation to individual requirements. Power supply via the KNX network (PoE) reduces the need for additional power supply lines.
Scope of Delivery
The device is delivered with a 55 mm insert with LED illuminated surface, mounting ring, KNX plug-in terminal, installation instructions (in German, English, French, Italian, Spanish), as well as product data file and manual available for download. The installation instructions and documentation are available in multiple languages.