| General |
| Housing | real glass, plastic, metal |
| Colour indication | 34 mm × 34 mm |
| Housing colour (similar) | RAL 9010 (white) RAL 9005 (black) |
| Degree of protection (after installation) | IP20 |
| Dimensions (W × H × D) | 55mm × 55mm × 35mm |
| Mounting ring (W × H) | 71 mm × 71 mm |
| Installation depth | ≈ 7mm |
| Weight total | ≈ 55g |
| Ambient temperature | 0…+45°C |
| rH (relative humidity), non-condensing | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | 115 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 30mA |
| KNX terminal connection wire diameter | Ø 0,6...0,8 mm s |
| Connection KNX plug-in terminals stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5s |
| Sensors |
| CO2 measurement range | 400...5000 ppm |
The Elsner Cala KNX IL CO2 (type 71390) is an integrated CO2 measuring device with visual display, designed to be integrated into existing KNX heating and ventilation systems. The device enables continuous monitoring of indoor air quality and visualizes the carbon dioxide concentration via an LED display in the colors green, yellow, or red. The color coding depends on the measured CO2 value, with green indicating good, yellow indicating moderate, and red indicating poor air quality. The display can either remain permanently lit or blink, depending on configuration. The device is designed for use in buildings with KNX infrastructure and visually integrates into existing switch rows, as it is installed in a 55 mm frame.
Applications
The Cala KNX IL CO2 is suitable for use in offices, schools, hospitals, administrative buildings, and other indoor spaces where continuous air quality monitoring is required. The visual display allows users to directly perceive the air condition, while the integrated KNX functionality enables automatic control of ventilation systems. The application is particularly beneficial in rooms with high visitor frequency or in enclosed spaces where adequate ventilation is often neglected.
Functions and Equipment in Detail
The device features an integrated CO2 sensor covering a measurement range of 400 to 5000 ppm. The measured values can be used to control ventilation systems, with a PI controller ensuring two-stage ventilation control. The threshold values for color changes can be adjusted via parameters or communication objects. Additionally, the device can calculate a mixed value from the internally measured CO2 value and a value received via the KNX bus, with the proportion of the internal value being configurable in percentage terms. This enables a more accurate representation of room air quality, especially in larger spaces.
Technology Explained Simply
Communication takes place over the KNX bus in medium TP1-256, using the S-Mode configuration mode. The device supports up to 254 group addresses and assignments, as well as 115 communication objects. The nominal voltage is 30 V DC SELV, with a maximum current consumption of 30 mA. The connection terminals for the KNX bus are designed for conductors with a diameter of 0.6 to 0.8 mm, requiring a stripping length of 5 mm. After the bus voltage is restored, it takes approximately 5 seconds before data can be received. The device enclosures are made of real glass, plastic, and metal, with housing colors corresponding to RAL 9010 (white) or RAL 9005 (black). The color display has a surface area of 34 mm × 34 mm. After installation, the device has a protection rating of IP20, providing protection against finger contact and solid foreign objects, but not against water or dust.
Compatibility and Accessories
The device is designed for use in KNX systems and requires a compatible 55 mm frame that matches the switch program used in the building. Installation is carried out in a weatherproof device box according to DIN EN IEC 60670-1 / DIN 49073. Configuration is performed using KNX software from ETS 5. Additionally, the device offers logic functions such as AND and OR gates, each with four inputs, which can be used for various switching and state events. Two setpoint comparators allow output of minimum, maximum, or average values from received values via communication objects.
Installation and Mounting
Mounting is done in a 55 mm frame that fits into the existing switch row. The mounting depth is approximately 7 mm, and the overall dimensions of the device are 55 mm × 55 mm × 35 mm.
Operational Advantages
The combination of visual display and KNX integration enables efficient and user-friendly air quality monitoring. The display directly informs users about the air condition, while automatic ventilation control increases energy efficiency. The configurability of threshold values and the ability to calculate mixed values enhance measurement accuracy. The integrated logic functions extend application possibilities beyond simple CO2 display, such as visualizing room occupancy or threshold exceedances.
Scope of Delivery
The scope of delivery includes the 55 mm insert with LED light surface, the mounting ring, the KNX plug-in terminal, the installation manual in German, English, French, Italian, and Spanish, as well as the handbook and product file available for download in the same languages. Batteries are not included in the scope of delivery.