Elsner 71382, EAN: 4051996713821

Elsner 71382 light signal dark black with traffic light function

Elsner 71382 light signal dark black with traffic light function

Lieske Part No. 2035921
Mfg Part No 71382
EAN-Code 4051996713821
Manufacturer Elsner
Here only 115,39 EUR
137,31 EUR incl. VAT

Further information for Elsner 71382 light signal dark black with traffic light function

General
Housingreal glass, plastic, metal
Colour indication31 mm × 31 mm
Housing colour (similar)RAL 9010 (white) RAL 9050 (black)
Degree of protection (after installation)IP20
Dimensions (W × H × D)55mm × 55mm × 35mm
Mounting ring (W × H)71 mm × 71 mm
Installation depth≈ 7mm
Weight total≈ 55g
Ambient temperature0…+45°C
rH (relative humidity), non-condensing0...95%
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses254
Maximum assignments254
Communication objects77
Nominal voltage30V DC SELV
Electricity consumption≤ 30mA
KNX terminal connection wire diameterØ 0,6...0,8 mm s
Connection KNX plug-in terminals stripping length5 mm
Time until data reception after bus voltage recovery≈ 5s
The Elsner Cala KNX IL is an integrated light signal for KNX systems, designed to be installed in a 55 mm frame matching the switch series used in the building. It serves for visual state indication within an intelligent building system and enables the display of status messages such as room occupancy, limit value exceedances, or other relevant events. The LED surface of the device can illuminate or flash in the colours green, yellow, or red, making different states clearly identifiable. Colour changes occur automatically upon status changes or when set limit values are exceeded. The device is designed for indoor use and features a protection rating of IP20 after installation, ensuring protection against finger contact and against solid foreign objects up to 12.5 mm. The housing colour corresponds to RAL 9050 (deep black), with the variant RAL 9010 (white) also available. The housing is made of real glass, plastic, and metal, ensuring a robust and visually appealing design.

Applications
This light signal is suitable for integration into existing KNX infrastructures, particularly in office buildings, apartments, or industrial facilities where visual feedback on system states is required. It can be used, for example, to indicate alarm conditions, operating states of heating or ventilation systems, or room occupancy. The display appears either continuously or flashing, depending on configuration and incoming signals. The combination of colour change and flashing function enables a differentiated state representation that is easy for operators and users to interpret.

Functions and Equipment in Detail
The device features an integrated KNX application offering various intelligent functions. These include 4 AND and 4 OR logic gates, each with 4 inputs. Inputs can be either switching events or 16 logic inputs in the form of communication objects. Each gate's output can be configured as either 1 bit or 2 x 8 bits. Additionally, 2 control value comparators are integrated, used for outputting minimum, maximum, or average values. Each comparator has 5 inputs for values received via communication objects. Configuration is performed via KNX software starting from ETS 5, enabling flexible adaptation to individual requirements.

Technology Explained Simply
The device communicates via the KNX bus system in medium TP1-256 and operates in configuration mode S-Mode. The nominal voltage is 30 V DC SELV, ensuring safe power supply via the bus cable. Power consumption is limited to ≤ 30 mA, resulting in low load on the bus system. The connection terminals for the KNX bus are designed for conductor diameters of Ø 0.6 to 0.8 mm, requiring a stripping length of 5 mm. After interruption of the bus voltage, it takes approximately 5 seconds for the device to resume data reception. The maximum number of group addresses and assignments is 254 each, providing high flexibility in system integration. In total, the device has 77 communication objects available for data transmission.

Compatibility and Accessories
The Cala KNX IL is designed for use in a 55 mm frame matching the switch program used in the building. The mounting ring has dimensions of 71 mm × 71 mm, enabling secure installation. The mounting depth is approximately 7 mm, ensuring a shallow installation height. The device is designed for an ambient temperature of 0 to +45 °C and relative humidity of 0 to 95 % (non-condensing). Storage temperature ranges from 25 to +70 °C. Overvoltage category III and pollution degree 2 meet requirements for indoor use with normal pollution. The device is not intended for outdoor use, as the IP20 protection rating does not provide weather protection.

Installation and Mounting
The device box must comply with DIN EN IEC 60670-1 / DIN 49073. The device is connected to the bus via the integrated KNX plug-in terminal. The installation manual is included in the delivery and is available in multiple languages (German, English, French, Italian, Spanish). Additionally, product data and handbook are available for download. Mounting does not require special tools, but the use of an appropriate frame and correctly installed device box is necessary.

Operational Advantages
The Cala KNX IL provides clear and reliable visual feedback on system states. The integrated logic function enables complex linking of states, allowing the device to function not only as a simple indicator but also as an intelligent component of the KNX system. Configuration via ETS 5 enables flexible adaptation to various application scenarios. Low power consumption and compact design reduce bus system load and simplify installation. The use of real glass, plastic, and metal ensures a robust and visually appealing design that seamlessly integrates into interior fittings. Colour and flashing functions enable intuitive state representation, easily interpretable by operators and users.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2035921
qrcode für Elsner 71382 light signal dark black with traffic light function