| General |
| Housing | real glass, plastic, metal |
| Colour indication | 31 mm × 31 mm |
| Housing colour (similar) | RAL 9010 (white) RAL 9050 (black) |
| Degree of protection (after installation) | IP20 |
| Dimensions (W × H × D) | 55mm × 55mm × 35mm |
| Mounting ring (W × H) | 71 mm × 71 mm |
| Installation depth | ≈ 7mm |
| Weight total | ≈ 55g |
| Ambient temperature | 0…+45°C |
| rH (relative humidity), non-condensing | 0...95% |
| Storage temperature | 25...+70°C |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 254 |
| Maximum assignments | 254 |
| Communication objects | 77 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 30mA |
| KNX terminal connection wire diameter | Ø 0,6...0,8 mm s |
| Connection KNX plug-in terminals stripping length | 5 mm |
| Time until data reception after bus voltage recovery | ≈ 5s |
The Elsner Cala KNX IL is a signal lamp for KNX systems, mounted in a 55 mm frame, and serves for visual representation of states in building automation systems. The device features an LED surface that can light up or flash in the colors green, yellow, or red to indicate various status messages such as limit value exceedances, room occupancy, or other system states. Color changes occur automatically as soon as a set state or status change is detected. The signal lamp is integrated into the existing switch series of the building and optically matches the interior design. The housing consists of real glass, plastic, and metal, with housing colors available in RAL 9010 (pure white) or RAL 9050 (black). The LED display has a size of 31 mm × 31 mm and, after installation, is protected to IP20, ensuring protection against finger contact and solid foreign objects.
Applications
The Cala KNX IL is suitable for use in intelligent building systems, particularly in areas where visual state indication is required. Typical applications include displaying room occupancy states, alarm notifications, operational states of equipment, or visualizing limit value exceedances in climate or heating systems. The signal lamp can be used in residential and office buildings, as well as in industrial or public facilities, where clear, colored signaling of system states is necessary. Integration is achieved via the KNX protocol, enabling communication with other KNX devices and integration into existing automation structures.
Functions and Equipment in Detail
The signal lamp provides a traffic light function, where the colors green, yellow, and red can either remain lit permanently or flash, depending on the set state. Color changes are controlled via the KNX application, which receives values through communication objects and compares them with set limit values. Configuration is performed using KNX software ETS 5 or higher. The device features 4 AND and 4 OR logic gates, where each gate input can process up to 4 switching events or 16 logic inputs via communication objects. The outputs of the logic gates can be configured optionally as 1 bit or 2 x 8 bits. Additionally, 2 control value comparators are integrated, each processing 5 inputs for values received via communication objects and outputting minimum, maximum, or average values.
Technology Explained Simply
The signal lamp operates in the KNX network via the TP1-256 medium and is configurable in S-Mode, enabling flexible and secure communication on the bus. The nominal voltage is 30 V DC SELV, representing a safe, low-voltage power supply via the KNX bus. The current consumption is up to 30 mA, indicating low load on the bus system. The connection terminals for the KNX bus are designed for conductor diameters of Ø 0.6 to 0.8 mm s, with a required stripping length of 5 mm. After a bus voltage interruption, it takes approximately 5 seconds for the device to resume data reception. The maximum number of group addresses and assignments is 254 each, enabling flexible integration into larger KNX systems. In total, the device has 77 communication objects for data transmission and processing.
Compatibility and Accessories
The Cala KNX IL is designed for use in KNX systems and requires a 55 mm frame that matches the switch program used in the building. Installation is carried out in a device box according to DIN EN IEC 60670-1 / DIN 49073. The device is delivered with a mounting ring, a KNX plug terminal, an installation instruction (in German, English, French, Italian, Spanish), as well as a product file and manual available for download. Installation takes place in a housing measuring 55 mm × 55 mm × 35 mm with a mounting depth of approximately 7 mm. The total weight is approximately 55 g. The operating ambient temperature ranges from 0 °C to +45 °C, with relative humidity (non-condensing) between 0 % and 95 %. Storage temperature is from 25 °C to +70 °C. The overvoltage category is III, and the pollution degree is 2, indicating use in indoor environments with normal pollution.
Installation and Mounting
Mounting is performed in a 55 mm frame that fits into the existing switch series of the building. The mounting ring is inserted into the device box, taking into account the mounting depth of approximately 7 mm. The KNX plug terminal is connected with a conductor diameter of Ø 0.6 to 0.8 mm s and a stripping length of 5 mm. Configuration is done via KNX software ETS 5 or higher, where logic functions, control value comparators, and communication objects can be individually set. Installation requires no additional tools, except for standard tools needed for mounting the frame and device box.
Advantages in Operation
The Cala KNX IL offers clear, colored visualization of system states that can be quickly and intuitively understood. The integrated logic functions enable flexible control and linking of states, allowing complex automation tasks to be realized. The low current consumption and SELV voltage ensure safe and energy-efficient operation. Compatibility with the KNX standard and support via ETS 5 ensure easy integration into existing systems. The robust construction from real glass, plastic, and metal, along with the IP20 protection rating, ensures reliable performance in indoor environments. The signal lamp is designed for use in buildings with normal pollution and in environments with relative humidity up to 95 % (non-condensing).