| General |
| Housing material | Plastic |
| Colour | white • dark grey (RAL 7043) |
| Mounting method | Surface or mast mounting |
| Degree of protection | IP44 |
| Dimensions (W × H × D) | 113 mm × 88 mm × 208 mm |
| Weight total | 230 g |
| Ambient temperature | 25 ... 50°C |
| Storage temperature | 30 ... 70°C |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 2300 |
| Maximum assignments | 2300 |
| Communication objects | 121 |
| Electricity consumption | 5,5 mA |
| Connection | KNX plug-in terminal |
| Conductor diameter | Ø 0,6...0,8 mm s |
| Strip length | 5 mm |
| Time until data reception after bus voltage recovery | 5 s |
| Sensors |
| Wind speed measurement range at +25°C | 2 m/s ... 25 m/s |
The Windancer basic W KNX sec wind sensor from Elsner is a device for measuring wind speed within a KNX building bus system. It is available in white and dark grey (RAL 7043) and can be mounted either surface-mounted or on a mast. The housing is made of plastic and provides an IP44 protection rating, ensuring protection against splashing water and dust. Dimensions are 113 mm (width) × 88 mm (height) × 208 mm (depth), with a total weight of 230 g. The recommended operating temperature range is between 25 °C and 50 °C, and the storage temperature range is between 30 °C and 70 °C.
Applications
This sensor is designed for use in buildings where wind speed monitoring is required for controlling window systems, ventilation systems, or other automated functions. It is particularly suitable for outdoor applications where continuous wind speed measurement is necessary, for example in buildings with roof windows or ventilation systems that are wind-dependent.
Functions and Equipment in Detail
The sensor measures wind speed using a stable cup anemometer, with a measurement range at +25 °C from 2 m/s to 25 m/s. Measured values can be displayed in units of m/s, km/h, and Beaufort. Communication takes place via the KNX system on the TP1-256 medium, using the S-Mode configuration mode. The device supports up to 2300 group addresses and assignments, as well as 121 communication objects. Power consumption is 5.5 mA. Connection is made via a KNX plug-in terminal, designed for conductors with a diameter of Ø 0.6 to 0.8 mm s, requiring a stripping length of 5 mm. After bus voltage recovery, data can be received after 5 seconds.
Technology Explained Simply
Wind speed is measured using a cup anemometer, whose design enables stable and precise measurement. Data is transmitted over the KNX network via the TP1-256 medium. The use of S-Mode allows for easy configuration and integration into existing KNX systems. The integrated KNX Data Secure function provides an extended peer-to-peer key table, enabling secure communication with up to 1,000 KNX Data Secure participants. The parameterization interface is intuitively designed and includes context help and semantic information, simplifying configuration in the ETS system. The Live Data Adjustment function allows the current measured value to be set as a threshold via a communication object.
Compatibility and Accessories
The sensor is designed for integration into KNX systems and can communicate with other KNX devices. Control is performed via the ETS application, where the wind value can be used to control up to 4 threshold-dependent switching outputs. States can be linked using AND and OR logic gates. There are 8 AND and 8 OR logic gates available, each with 4 inputs. Inputs can be either switching events or 16 logic inputs in the form of communication objects. Each gate output can be configured as either 1 bit or 2 x 8 bits. Optional mounting brackets (L, Flex L, Flex S, Fix, Fix P) are available, enabling installation at various locations.
Installation and Mounting
Mounting is either surface-mounted or on a mast. Installation requires the use of a KNX plug-in terminal, designed for conductors with a diameter of Ø 0.6 to 0.8 mm s. The stripping length is 5 mm. Configuration is performed via the ETS application, with the integrated parameterization interface and context help simplifying the settings. The installation manual is available in multiple languages (German, English, French, Italian, Spanish) and is included.
Operational Advantages
The sensor provides precise and reliable wind speed measurement, which can be used for controlling building technology. The integrated logic function enables flexible linking of states, supporting automation of functions such as window opening or ventilation systems. Secure communication via KNX Data Secure ensures protected data exchange within the network. Intuitive operation and support for Live Data Adjustment simplify threshold adjustment during operation. The availability of optional mounting brackets extends the sensor’s application possibilities at various mounting locations.
Scope of Delivery
The scope of delivery includes the wind sensor, a KNX plug-in terminal, and the installation manual in multiple languages (German, English, French, Italian, Spanish). Additionally, a handbook is available for download, as well as the application in the mentioned languages. Optional mounting brackets (L, Flex L, Flex S, Fix, Fix P) can be ordered separately, enabling installation at various locations.