| General |
| Housing | aluminium anodized, real glass |
| Colour (similar) | RAL 9005 jet black |
| Degree of protection | IP67 |
| Dimensions (W × H × D) | 191 mm × 121 mm × 23 mm |
| Weight including cable | ≈ 950 g |
| Display resolution | 800 × 480 px |
| Ambient temperature | 20…+55 °C |
| Storage temperature | 30...+70 °C |
| Over voltage category | III |
| Connection cable length | 3 m |
| Current-carrying capacity of cable | 3 A |
| Conductor diameter connection terminals wire cross-section rigid | 0.2…4 mm² |
| Wire diameter connection terminals wire cross-section flexible | 0.14…4 mm² |
| Strip length | 11mm |
| KNX bus |
| Medium | TP1-256 |
| Configuration mode | S-Mode |
| Maximum group addresses | 1024 |
| Maximum assignments | 1024 |
| Communication objects | 336 |
| Nominal voltage | 30V DC SELV |
| Electricity consumption | ≤ 10mA |
| Time until data reception after bus voltage recovery | 4 s |
| Power supply |
| Voltage (SELV power supply according to EN 61558) | 20...30V DC SELV |
| Power consumption [at] | ≤ 140mA [24 V DC] |
The Elsner Fabro KNX Touchpanel (type 71270) is an operating and display device for the KNX building bus system, designed for controlling and visualizing building technology components. It features a 7-inch colour touch display with a resolution of 800 × 480 pixels and a real glass touch surface, ensuring precise operation. The housing is made of anodized aluminium and offers an IP67 protection rating, making it dust- and water-tight and suitable for outdoor use. The housing colour corresponds to RAL 9005 jet black. Dimensions are 191 mm (width) × 121 mm (height) × 23 mm (depth), and the weight including the connection cable is approximately 950 g.
Applications
This touchpanel is designed for integration into KNX systems used in residential and commercial buildings. It enables manual operation and display of values, data, and alarm events. The display consists of five configurable pages, each capable of showing eight areas. Each area can be assigned text, values, symbols, and colour fields and linked to functions ranging from 1 bit (switching) to 14 bytes (text). The application is therefore particularly suitable for visualizing heating, ventilation, lighting, and security systems.
Functions and Equipment in Detail
The device offers a wide range of functions for individual configuration. It supports 8 AND and 8 OR logic connections, each with 4 inputs. 16 logic inputs are available in the form of communication objects. The output of each logic gate can be configured as either 1 bit or 2 x 8 bits. Additionally, 8 multifunction modules are integrated, enabling calculations, condition checks, and data conversions. For alarm functions, 8 alarm inputs are available, which can trigger text displays, beep tones, or flashing display illumination. Additional features include a screensaver (clock, off), an automatic shutdown function with an integrated light sensor (shuts off in darkness), and an optional key click sound.
Technology Explained Simply
The touchpanel communicates via the KNX bus system in medium TP1-256 and operates in configuration mode S-Mode. It supports up to 1024 group addresses and 1024 assignments. The number of communication objects is 336. The nominal voltage of the KNX bus is 30 V DC SELV, with a current consumption of ≤ 10 mA. Power supply is via a SELV power supply unit according to EN 61558, with a voltage of 20 to 30 V DC SELV. At an operating voltage of 24 V DC, the current consumption is ≤ 140 mA. The time required to resume data reception after a bus voltage recovery is 4 seconds. The operating ambient temperature ranges from 20 °C to +55 °C, and the storage temperature ranges from 30 °C to +70 °C. The overvoltage category is III.
Compatibility and Accessories
The touchpanel is designed for use in KNX systems and can be connected to other KNX components. The connection cable has a length of 3 m and is rated for a current flow of up to 3 A. The connection terminals support rigid conductors with a cross-section of 0.2 to 4 mm² and flexible conductors from 0.14 to 4 mm². The stripping length is 11 mm. The device is supplied with a mounting bracket, M4 threaded pin, connection cable, 4 countersunk head screws WN54 (40 mm galvanized, Phillips head), 4 SX6 anchors, 4 two-pole connection terminals, and a data sheet with installation instructions (in German, English, French, Italian, Spanish). A manual and product file are available for download.
Mounting and Installation
Mounting is done on a wall or in a suitable mounting fixture. The included bracket and screws allow for secure fastening. The connection cable is connected to the terminals, ensuring the stripping length of 11 mm is observed. Configuration is performed via the KNX system, taking into account the maximum values for group addresses, assignments, and communication objects.
Advantages in Operation
The touchpanel offers a robust and weather-resistant design suitable for outdoor use. The intuitive operation via the touch display enables quick and precise control of building technology. The integrated logic and calculation functions allow flexible adaptation to individual requirements. Alarm functions ensure rapid response to critical events. The automatic shutdown function with light sensor reduces energy consumption and extends the display’s lifespan. Support for up to 1024 group addresses and 1024 assignments provides high scalability for complex building automation systems.