| Ethernet/LAN |
| IP connector socket | RJ45 (1000 Mbit/s) |
| Data rate | 1 Gbit/s |
| Installation | IEEE 802.3: 1000BASE-T, 100BASE-TX, 10BASE-T - IPv4 & IPv6 |
| Network protocols | ARP, ICMP, ICMPv6, IGMP, UDP/IP, TCP/IP, DHCP, NTP, mDNS, DNS-SD, HTTP |
| Maximum number of simultaneous KNXnet/IP tunneling connections | 4 |
| General |
| Housing | Plastic |
| Degree of protection | IP20 |
| Dimensions (W × H × D) | 72 mm × 90 mm × 60 mm |
| Pitch units | 4 |
| Weight total | ≈ 150 g |
| Ambient temperature | 5…+45 °C |
| Ambient air humidity (rH), non-condensing | 5...93 % |
| Storage temperature | 25...+70 °C |
| Protection class | III |
| Over voltage category | III |
| Pollution degree | 2 |
| KNX bus |
| Nominal voltage | 30 V DC SELV |
| Connection | bus terminal block |
| Conductor diameter | Ø 0,8 mm s |
| Strip length | 5 mm |
| Power supply |
| Voltage | 12...30 V DC SELV |
| Current consumption at | 30 V DC |
| max. | 170 mA |
| typical | 70...100 mA |
The Elsner KNX Matter Server (type 71256) is a gateway device that serves as an interface between a KNX home automation system and Matter-based smart assistants. The device enables the integration of KNX components into modern, voice-controlled smart home ecosystems, with communication taking place locally, thus ensuring high data security. The server is identical in design to the 1Home Server KNX Pro and operates “powered by 1Home”, ensuring compatibility with a wide range of smart assistant platforms. Setup is performed using an installation manual available in multiple languages (German, English, French, Italian, Spanish).
Applications
The KNX Matter Server is designed for connecting existing KNX installations with modern smart home systems. It is particularly suitable for buildings where decentralized, locally executed control is desired, while also benefiting from voice control, geofencing, or visualization functions. Integration is achieved via the Matter protocol, which enables standardized communication between different manufacturers. The device is designed for indoor use, as it has an IP20 protection rating, protecting against contact with moving parts and against solid foreign objects larger than 12.5 mm.
Functions and Equipment in Detail
The server features an RJ45 connector for Ethernet connection, supporting data rates up to 1 Gbit/s. Network installation follows IEEE 802.3 standards, including 1000BASE-T, 100BASE-TX, and 10BASE-T, with support for IPv4 and IPv6. Network protocols include ARP, ICMP, ICMPv6, IGMP, UDP/IP, TCP/IP, DHCP, NTP, mDNS, DNS-SD, and HTTP, enabling flexible integration into existing networks. Up to four simultaneous KNXnet/IP tunneling connections can be operated, supporting use in larger installations. Power supply is provided via a voltage of 12 to 30 V DC SELV, with typical current consumption of 70 to 100 mA and a maximum of 170 mA.
Technology Explained Simply
The KNX Matter Server operates as a local server, handling communication between the KNX bus and Matter-compatible devices. Data transmission occurs over the Ethernet network, with the connection established via the RJ45 connector system. Power supply is via SELV voltage (safety extra-low voltage), ensuring high safety during installation. Operating temperature ranges from 5 to +45 °C, and relative humidity can reach up to 93 % (non-condensing). The device is designed for indoor use and is delivered in a plastic housing with dimensions 72 mm × 90 mm × 60 mm. It complies with protection class III and overvoltage category III, ensuring safe use in electrical installations.
Compatibility and Accessories
The server is designed for connection with Matter-based smart assistants that support voice control, geofencing, and visualization functions. Compatibility with various smart home platforms is ensured through the use of the Matter protocol. The device is equipped with a bus terminal block designed for conductors with a diameter of Ø 0.8 mm and a stripping length of 5 mm. The delivery includes the KNX Matter Server, a KNX terminal block, and a terminal block in white/yellow. The installation manual is included in multiple languages.
Mounting and Installation
Mounting is performed in a standard distribution box, requiring 4 mounting units. The bus terminal block is installed directly on the KNX bus, ensuring the required stripping length of 5 mm is maintained. Power supply is provided via an external source in the range of 12 to 30 V DC SELV. The Ethernet connection is established via the RJ45 connector system. Setup is performed using the provided installation manual.
Operational Advantages
Operation of the KNX Matter Server is local, enabling high data security and independent functionality without requiring a permanent internet connection. Only temporary internet access is needed for updates. Integration of KNX components into smart home systems is achieved without additional hardware, reducing the number of required devices. Support for up to four simultaneous KNXnet/IP tunnels enables flexible use in larger installations. Power supply via SELV voltage ensures safe installation, and the operating temperature range of 5 to +45 °C makes the device suitable for indoor use. The delivery includes all necessary components for installation, including terminal blocks and the installation manual in multiple languages.